VINNAPAS® 5343 E is ideally suited for paver joint sand applications. It imparts flexibility while reducing wash-out.


  • VINNAPAS® 5343 E is is a copolymer powder of vinyl acetate and ethylene.
  • VINNAPAS® 5343 E contains a fine mineral filler as an antiblocking agent. It is produced without using film-forming or coalescing agents.
  • VINNAPAS® 5343 E provides flexibility to paver sands to enable them to better withstand the effects of wetting & drying, ground movement, freeze-thaw & thermal cycling.
  • It improves the resistance of paver sand to wash-off from rain, especially in high-exposure areas such as downspouts.



Store in a dry and cool place.

Protect against moisture.

Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be downloaded via WACKER web site

Big Bags or bulk on request.

VINNAPAS® 5343 E is typically blended with ASTM C 33 concrete sand or ASTM C 144 masonry sand and a small amount of Portland cement to produce high-performance polymeric joint sands. Please discuss additional applications with your WACKER customer representative.


For the production of polymeric joint sands blend VINNAPAS® 5343 E with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate and lead to the formation of small lumps of resin. Base sand needs to be properly graded to avoid segregation during handling. In the field the paver sand is poured and swept into the joints. It is subsequently wetted down to start the film-forming process. Avoid sweeping the paver sand over more than a few feet and do not over-wet as polymer could be washed away before film has formed.


如果产品不是用于我们推荐的应用, 则购买者应对该产品的选择、加工和使用负全部责任. 此外还应遵守所有的相关法律法规.

可再分散乳胶粉的颜色可能会有略微的变化, 但不会对产品的功能造成影响.


25 kg paper bags
Big Bags or bulk on request.


可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期(该日期优先适用). 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.


Changsha Port
000000 Changsha
+86  400  921-6699 (电话)
Contact Sales


  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question