SILFOAM® SE 6
SILFOAM® SE 6 is a milky, comparatively viscous antifoam emulsion.
特性
SILFOAM® SE 6
SILFOAM® SE 6的特殊性能
- Listed in EPA database
- 乳液
In general we recommend to stir the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm). But be cautious: too high shear can break the emulsion.
SILFOAM® SE 6 can be used undiluted or in dilutions (e.g. 1 : 10 - 1 : 50) made with cold water. It is added either in portions or continuously to the process or product concerned. The antifoam emulsion disperses readily without the need for high shear forces. Dilutions should be used up as soon as possible.
储存
Minimum temperature allowed during storage and
transportation:
0 °C
Maximum temperature allowed during storage and
transportation:
40 °C
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）