PULPSIL® 745 E
PULPSIL® 745 E is a low viscous, highly effective silicone antifoam emulsion, especially for the use in pulp mills.
PULPSIL® 745 E is characterised by:
- low viscosity (easily dosable)
- excellent good long-term efficiency
- very good knock-down efficiency
- complies with FDA/BfR-paragraphs
In general we recommend to stir the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 - 400 rpm). But be cautious: too high shear can break the emulsion. The emulsion should be added undiluted, as it is already sufficiently dispersed by its emulsion form. If a pre-dilution still should be necessary, we recommend dilutions with cold water in proportions of 3 parts emulsion : 1 part of water to max. 1 part emulsion : 1 part of water. Sufficient quality of this pre-dilution should be checked by previous trials in laboratory scale. For manufacture of the pre-dilution add first the emulsion and then add the water under weak stirring. The ready-made dilution has to be agitated 2 to 3 times a day for 15 to 20 min by weak stirring and should be processed within few days.
PULPSIL® 745 E acts primarily as an antifoam agent and drainage aid and may be added at various stages during the manufacturing process.
PULPSIL® 745 E is mainly applied to pulp - washing and screening processes, but is also effective during bleaching and in waste water treatment.