LUMISIL® 010 A/B
LUMISIL® 010 LP A/B is a 2-part silicone gel(1:1) that is specially designed for injection dispensing systems with low viscosity by room temperature cure or heat conditions for displays.
特性
LUMISIL® 010 A/B的特殊性能
- 光学透明
- 加成固化
- 双组分
- 无化学收缩
- 易流动的
- 高温下快速固化
- 高透明度
- Encapsulation of optical & electronic components
- Optical bonding for touch screen panel
- Production of damping elements
All surfaces must be clean and free of contaminants that will inhibit the cure of the product
Examples of inhibiting contaminants are sulfer containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.
In mass production, Degassing is essentional process before mixing of materials.
Part A : Part B = 1 : 1
Curing speed can be adjusted by temperature and time. Heat can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
储存
The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
06612-060 Jandira
巴西
+55 11 4789-8345 （传真）
网站
经销商
瓦克在全球拥有专业的销售合作伙伴网络。 请选择一项应用，以便我们为您提供联系人。
04547-006 São Paulo
Galpão 4 Cid Sat.S Barbara São Paulo CEP 08340-120