SILFOAM® SE 40
SILFOAM® SE 40 is a relatively heat-resistant, viscous, non-ionic antifoam emulsion.
Eigenschaften
Conventional defoaming emulsions often form slightly oily deposits under the effect of heat during use. SILFOAM® SE 40 , on the other hand, is extremely stable, even at temperatures around boiling point.
Datenblätter
SILFOAM® SE 40 is usually admixed with the formulations or liquors to be defoamed before the process begins, and extra may be added as necessary during the course of the process. To improve the accuracy of metering, SILFOAM® SE 40 can be prediluted with cold water in a ratio of 1:5 to 1:10. Preliminary tests should be carried out to ensure that SILFOAM® SE 40 is suitable for the application and to determine the amount required.
SILFOAM® SE 40 can be used in closed systems at a pH of between 3 an 11, and from ambient temperature up to 130 °C. SILFOAM® SE 40 is therefore generally recommended for critical systems, especially high-temperature and jet dyeing systems, in which it acts as a foam suppressant and deaeration agent. Apart from textile applications, it can also be used in processes that would be contaminated by the oily deposits formed when conventional antifoam agents are subject to effects such as heat, shearing or general compatibility problems.
Verpackung / Gebinde
SILFOAM® SE 40 is available in
- 200 kg drums
- 950 kg IBC
Lagerung
The "Best use before end" date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
117525 Singapore
Singapore
+65 6542-6632 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.