SEMICOSIL® 9671 TC4
SEMICOSIL® 9671 TC4 is a thermal conductive gap filler silicone material used as heat sink application for the electronic industrie.
Eigenschaften
SEMICOSIL® 9671 TC4 is a shear-thinning, easy dispensing, non-slump, addition-curing, two part silicone rubber that cures at room temperature to a crosslinked, soft rubber with excellent thermal conductivity.
- Thermal conductive gap filler rubber
- Shear thinning for easy pumping & dispensing
- No oil bleeding
- Low modulus material for shear stress reduction
- Low density
- Low volatile D4-D8 < 100ppm
- UL 94 V-0
- Excellent low and high temperature properties from – 40 °C to +130 °C
Datenblätter
The platinum catalyst is contained in component A. Only components A and B with the same lot number may be processed together!
Verpackung / Gebinde
SEMICOSIL® 9671 TC4 is available in Hobbocks and Drums.
Lagerung
SEMICOSIL® 9671 TC4 has a shelf life of at least 3 months when stored between 5°C and 30°C in the orginally sealed container. The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
06612-060 Jandira
Brasilien
+55 11 4789-8345 (Fax)
Webseite
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Distributoren
WACKER verfügt weltweit über ein Netzwerk fachkundiger Vertriebspartner. Bitte wählen Sie noch eine Anwendung aus damit wir Ihnen Ihre Ansprechpartner nennen können.
04547-006 São Paulo
Galpão 4 Cid Sat.S Barbara São Paulo CEP 08340-120