ELASTOSIL® N199 TRANSPARENT
ELASTOSIL® N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant which cures at room temperature under influence of atmospheric moisture.
ELASTOSIL® N199 TRANSPARENT exhibits excellent primerless adhesion to many substrates high tear strength
- Medium hardness
- High flexibility
- Excellent adhesion
ELASTOSIL® N199 TRANSPARENT的特殊性能
- 交联性能: 单组分
- 具体特征: 单组分
- 具体特征: 高抗撕裂性能
- 流变性: 抗下垂
- 粘附性及强度: 出色的粘结力
- 表面效应: 出色的粘结力
- 附着力: 对金属无腐蚀性
Multipurpose adhesive / sealant for the electronics industry, typical use for CIPG- and FIPG-applications
ELASTOSIL® N199 TRANSPARENT is a one-part room temperature vulcanizing sealant that cures to a flexible silicone rubber on exposure to water vapor in the air. During the curing process a small amount of an oxime is relea sed. The crosslinking starts at all places where the paste comes into contact with atmospheric moisture and proceeds from the outer to the inner parts of the silicone. After about 30 minutes a skin of cured material is formed at the surface. After formation of a sufficiently thick skin, glued parts may be handled without destruction.
For the crosslinking to take place, water vapor from the air is necessary. For this reason the curing rate strongly depends on the atmospheric humidity in the surrounding. The higher the atmospheric moisture the faster the material will be cured fully. The temperature has a great influence on the curing rate as well. The higher the temperature the faster the material will be fully cured.
If removing of silicone rubber from machines or dispensing equipment is necessary, white spirit is recommended as a solvent. However, cleaning should take place before the rubber is fully cured. Afterwards only the use of mechanical forces in combination with a swelling solvent or the use of high temperatures of approximately 100°C will help to remove sealant residues.
ELASTOSIL® N199 TRANSPARENT shows good primerless adhesion to many substrates. We recommend running prelimi-nary tests to optimize conditions for the particular application.
Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.