ELASTOSIL® A 2000 is a one-component, thixotropic sealant intended for gasketing and sealing applications where resistance to long-life lubricants (such as hypoid gear lubricant) under harsh conditions is required.


  • One-component, room temperature cure
  • Non-slump, unaffected by shear
  • Adheres to most substrates without priming
  • Resistant to hot lubricating oils

ELASTOSIL® A 2000的特殊性能

  • 单组分
  • 单组分体系
  • 可在最低-40°C和最高+150°C下保持柔韧性
  • 室温下快速固化
  • 抗下垂
  • 缩合固化
  • 耐介质
  • 触变

Surfaces to be bonded must be clean, dry and free of oils and grease. ELASTOSIL® A 2000 can be bulk dispensed with conventional drum and pail extruder pumps to feed gasket tracing machines for precise bead placement and material efficiency. Manual applications for repair, short runs or low volume applications may be accomplished with a pail extruder equipped with a high pressure flexible fluid hose and extrusion gun. Recommended equipment suppliers for transfer systems and dispensing machines will be supplied upon request. For most gasket applications, a sealant bead of 3 to 4 mm width is sufficient. Assemble parts immediately so that the sealant is spread.



The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.


Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
+86  21  6130-2000 (电话)
+86 21 6130-2500  (传真)
Contact Sales


  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question