POWERSIL® 466 A/B
POWERSIL® 466 A/B is a liquid silicone rubber with medium conductivity, stable electrical properties and good mechanical properties.
- high elongation at break, low tension set
- stable electrical properties
- good mechanical properties
- ready-to-use, two-component system
POWERSIL® 466 A/B的特殊性能
POWERSIL® 466 A/B is suitable for production of electrically conductive injection moulded articles, especially cable accessories in the medium and high voltage range. The range of use spreads from push-on accessories to cold shrink applications. POWERSIL® 466 A/B combines a low Shore A durometer with high elongation, good setting properties (low tension set) and good mechanical properties which are a must for cold shrink applications.
Components A and B are delivered ready to use in drums of 20 and 200 litres capacity. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the heated mold.
The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.
For detailed information, refer to brochures on www.wacker.com.
This product is available in 20 kg pail and 200 kg drum kits.