此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® LR 34004/50 A/B
ELASTOSIL® LR 34004/50 A/B is a paste-like, white two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness.
特性
ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive which meets the requirements of the US and European Pharmacopoeia.
ELASTOSIL® LR 34004/50 A/B的特殊性能
- 具体特征: 不透X-射线
- 具体特征: 减少挥发物含量
- 具体特征: 食品接触
- 监管: 食品接触
免责声明
所提供之所有信息均基于我们当前所掌握的知识。尽管如此，我们不对其作任何担保、也不承担任何责任，并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外，本免责申明还适用于与第三方权利有关之事宜，尤其是在德国境外。
ELASTOSIL® LR 34004/50 A/B is particularly suitable for the economical production of large series of injection-moulded articles. ELASTOSIL® LR 34004/50 A/B is designed for medical and pharmaceutical applications.
Properly cured and post-cured vulcanizates of ELASTOSIL® LR 34004/50 A/B can be used for food contact applications and are suitable for use under the Recommendation "XV. Silicones" of the BfR and FDA 21 CFR §177.2600 "Rubber Articles Intended for Repeated Use" considering any given limitations on extractable and volatile substances.
The following studies were performed on vulcanizates of ELASTOSIL® LR 34004/50 A/B according to ISO 10993:
- Cytotoxicity (ISO 10993-5)
- Sensitation LLNA (ISO 10993-10)
- Pyrogenicity (ISO 10993-11)
The following studies were performed on vulcanizates of ELASTOSIL® LR 34004/50 A/B according to USP class VI:
- Acute systemic toxicity
- Intracutaneous toxicity
- Implantation test
No adverse effects have been detected at any of the studies performed.
The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.
For detailed information refer to our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
包装
This product is available in 20 kg pail and 200 kg drum kits.
储存
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. For detailed information about storage conditions please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）
更多产品
| 产品 | 技术数据 | |||||
|---|---|---|---|---|---|---|
| 外观 | Shore density A | Breaking strength | 断裂伸长率 | Tear-growth resistance | 压缩变形 | |
| ELASTOSIL® LR 34004/50 A/B | white white | 50[1] 50[1] | 7.8 N/mm²[2] 7.8 N/mm²[2] | 450 %[3] 450 %[3] | 26 N/mm[4] 26 N/mm[4] | - - |
| ELASTOSIL® LR 5040/20 A/B | slightly bluish slightly bluish | 20[1] 20[1] | 7.9 N/mm²[2] 7.9 N/mm²[2] | 890 %[3] 890 %[3] | 33 N/mm[4] 33 N/mm[4] | - - |
| ELASTOSIL® LR 5040/30 A/B | slightly bluish slightly bluish | 30[1] 30[1] | 9.2 N/mm²[2] 9.2 N/mm²[2] | 760 %[3] 760 %[3] | 32 N/mm[4] 32 N/mm[4] | - - |
| ELASTOSIL® LR 5040/40 A/B | slightly bluish slightly bluish | 40[1] 40[1] | 9.0 N/mm²[2] 9.0 N/mm²[2] | 580 %[3] 580 %[3] | 38 N/mm[4] 38 N/mm[4] | - - |
| ELASTOSIL® LR 5040/45 A/B | slightly bluish slightly bluish | 45[1] 45[1] | 9.0 N/mm²[2] 9.0 N/mm²[2] | 580 %[3] 580 %[3] | 38 N/mm[4] 38 N/mm[4] | - - |
| ELASTOSIL® LR 5040/50 A/B | slightly bluish slightly bluish | 50[1] 50[1] | 9.5 N/mm²[2] 9.5 N/mm²[2] | 490 %[3] 490 %[3] | 42 N/mm[4] 42 N/mm[4] | - - |
| ELASTOSIL® LR 5040/60 A/B | slightly bluish slightly bluish | 60[1] 60[1] | 9.0 N/mm²[2] 9.0 N/mm²[2] | 380 %[3] 380 %[3] | 50 N/mm[4] 50 N/mm[4] | - - |
| ELASTOSIL® LR 5040/70 A/B | slightly bluish slightly bluish | 70[1] 70[1] | 9.5 N/mm²[2] 9.5 N/mm²[2] | 370 %[3] 370 %[3] | 36 N/mm[4] 36 N/mm[4] | - - |
| SILPURAN® 6000/05 A/B | transparent transparent | 5[1] 5[1] | 2.5 N/mm²[2] 2.5 N/mm²[2] | 700 %[3] 700 %[3] | 6 N/mm[4] 6 N/mm[4] | - - |
| SILPURAN® 6000/10 A/B | transparent transparent | 10[1] 10[1] | 4.2 N/mm²[2] 4.2 N/mm²[2] | 740 %[3] 740 %[3] | 13 N/mm[4] 13 N/mm[4] | 15 %[5] 15 %[5] |
| SILPURAN® 6000/20 A/B | transparent transparent | 20[1] 20[1] | 8.0 N/mm²[2] 8.0 N/mm²[2] | 850 %[3] 850 %[3] | 21 N/mm[4] 21 N/mm[4] | 17 %[5] 17 %[5] |
| SILPURAN® 6000/30 A/B | transparent transparent | 30[1] 30[1] | 8.6 N/mm²[2] 8.6 N/mm²[2] | 650 %[3] 650 %[3] | 25 N/mm[4] 25 N/mm[4] | 13 %[5] 13 %[5] |
| SILPURAN® 6000/40 A/B | transparent transparent | 40[1] 40[1] | 9.6 N/mm²[2] 9.6 N/mm²[2] | 600 %[3] 600 %[3] | 29 N/mm[4] 29 N/mm[4] | 11 %[5] 11 %[5] |
| SILPURAN® 6000/50 A/B | transparent transparent | 50[1] 50[1] | 10.0 N/mm²[2] 10.0 N/mm²[2] | 480 %[3] 480 %[3] | 30 N/mm[4] 30 N/mm[4] | 14 %[5] 14 %[5] |
| SILPURAN® 6000/60 A/B | transparent transparent | 60[1] 60[1] | 10.0 N/mm²[2] 10.0 N/mm²[2] | 350 %[3] 350 %[3] | 27 N/mm[4] 27 N/mm[4] | 14 %[5] 14 %[5] |
| SILPURAN® 6000/70 A/B | transparent transparent | 70[1] 70[1] | 9.5 N/mm²[2] 9.5 N/mm²[2] | 290 %[3] 290 %[3] | 22 N/mm[4] 22 N/mm[4] | 11 %[5] 11 %[5] |
| SILPURAN® 6400/40 A/B | transparent transparent | 40[1] 40[1] | 9.2 N/mm²[2] 9.2 N/mm²[2] | 630 %[3] 630 %[3] | 35 N/mm[4] 35 N/mm[4] | 25 %[5] 25 %[5] |
| SILPURAN® 6400/50 A/B | transparent transparent | 50[1] 50[1] | 9.1 N/mm²[2] 9.1 N/mm²[2] | 450 %[3] 450 %[3] | 47 N/mm[4] 47 N/mm[4] | 25 %[5] 25 %[5] |
| SILPURAN® 6400/60 A/B | transparent transparent | 60[1] 60[1] | 9.5 N/mm²[2] 9.5 N/mm²[2] | 430 %[3] 430 %[3] | 51 N/mm[4] 51 N/mm[4] | 20 %[5] 20 %[5] |
| SILPURAN® 6600/40 A/B | transparent transparent | 40[1] 40[1] | 9.4 N/mm²[2] 9.4 N/mm²[2] | 550 %[3] 550 %[3] | 32 N/mm[4] 32 N/mm[4] | 14 %[5] 14 %[5] |
| SILPURAN® 6600/50 A/B | transparent transparent | 50[1] 50[1] | 8.9 N/mm²[2] 8.9 N/mm²[2] | 440 %[3] 440 %[3] | 31 N/mm[4] 31 N/mm[4] | 13 %[5] 13 %[5] |
| SILPURAN® 6600/60 A/B | transparent transparent | 60[1] 60[1] | 9.0 N/mm²[2] 9.0 N/mm²[2] | 310 %[3] 310 %[3] | 26 N/mm[4] 26 N/mm[4] | 14 %[5] 14 %[5] |
| SILPURAN® 6610/40 A/B | white white | 40[1] 40[1] | 7.2 N/mm²[2] 7.2 N/mm²[2] | 510 %[3] 510 %[3] | 22 N/mm[4] 22 N/mm[4] | 12 %[5] 12 %[5] |
| SILPURAN® 6610/50 A/B | white white | 50[1] 50[1] | 8.0 N/mm²[2] 8.0 N/mm²[2] | 450 %[3] 450 %[3] | 25 N/mm[4] 25 N/mm[4] | 12 %[5] 12 %[5] |
| SILPURAN® 6610/60 A/B | white white | 60[1] 60[1] | 7.0 N/mm²[2] 7.0 N/mm²[2] | 300 %[3] 300 %[3] | 20 N/mm[4] 20 N/mm[4] | 15 %[5] 15 %[5] |
| SILPURAN® 6700/40 A/B | transparent transparent | 40[1] 40[1] | 8.5 N/mm²[2] 8.5 N/mm²[2] | 640 %[3] 640 %[3] | 23 N/mm[4] 23 N/mm[4] | 40 %[6] - |
| SILPURAN® 6700/50 A/B | transparent transparent | 50[1] 50[1] | 8.5 N/mm²[2] 8.5 N/mm²[2] | 590 %[3] 590 %[3] | 24 N/mm[4] 24 N/mm[4] | 50 %[6] - |
| SILPURAN® 6700/60 A/B | transparent transparent | 60[1] 60[1] | 8.2 N/mm²[2] 8.2 N/mm²[2] | 490 %[3] 490 %[3] | 26 N/mm[4] 26 N/mm[4] | 60 %[6] - |
| SILPURAN® 6740/40 A/B | transparent transparent | 40[1] 40[1] | 9.2 N/mm²[2] 9.2 N/mm²[2] | 710 %[3] 710 %[3] | 27 N/mm[4] 27 N/mm[4] | - - |
| SILPURAN® 6760/50 A/B | transparent transparent | 50[1] 50[1] | 8.4 N/mm²[2] 8.4 N/mm²[2] | 600 %[3] 600 %[3] | 27 N/mm[4] 27 N/mm[4] | - - |
[1] Shore density A | DIN ISO 48-4, [2] Breaking strength | ISO 37 type 1, [3] 断裂伸长率 | ISO 37 type 1, [4] Tear-growth resistance | ASTM D 624 B, [5] 压缩变形 | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C, [6] 压缩变形 | 22 h | 125 °C | DIN ISO 815-1 type B method A