ELASTOSIL® R 402/60 US
ELASTOSIL® R 402/60 US Silicone Rubber Base is noted for its high transparency and good mechanical properties. Due to the high green strength of this product, it can be used to make complex extruded profiles. Its vulcanizing characteristics make it possible to achieve short cycle times in the production of rubber moldings by compression, transfer and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries. - ELASTOSIL® R 402/60 US contains those ingredients which are suitable for food contact applications.* *Under Title 21 "Food and Drugs," Part 177.2600, "Rubber articles intended for repeated use." Because this regulation contains limitations, compliance to the regulation is the responsibility of the user.
- Excellent tensile strength
- Excellent clarity
- Exceptional extrusion qualities
- Excellent molding qualities
Recommended Curing Agent Levels - 1.5 parts: 2,4-dichlorobenzoyl peroxide (50% active in silicone paste). - 0.7 parts: dicumyl peroxide (98% active). - 1.2 parts: 2,5-di(t-butylperoxy)-2,5-dimethylhexane (45% active). - 1.0 parts: dibenzoyl peroxide (50% active).
The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.