此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

SILRES® BS 720 A

SILRES® BS 720 A is a clear coating intended to create a dry erase surface on most construction material substrates.  It is a neat, solvent free, 1 part (1K), very low odor, low VOC, silicone hybrid chemistry.



特性

With proper safety precautions and personal protective equipment, this product is intended for contractor or consumer (DIY) use.  Some precautions are detailed in the application section below.  Please refer to the Safety Data Sheet for additional requirements.

 

Product may be applied as-is for indoor home, office and industrial environments.  It has been tested and approved for use on:

  • painted drywall
  • metal
  • concrete
  • wood

 

This product is a one component, isocyanate and formaldehyde free product.  It may be applied by brush or roller.  When fully cured SILRES® BS 720 A provides a surface finish that is:

  • easy for markers to be removed with a cloth or dry erase eraser
  • free from ghosting (no marks left behind)
  • hard
  • water resistant
  • chemical resistant (including hand sanitizer alcohols & hand lotions)
  • durable

Proper application of this product is critical.

  • Allow adequate ventilation.  Wear eye protection.
  • This product is intended to be applied at full strength; as supplied by the manufacturer.
  • Temperature and humidity will affect your application experience.  50% Relative Humidity at 70 °F is ideal.
  • Both higher temperature and/or higher humidity will speed up the drying process.  Adjust for changes in these conditions during application or seek different application conditions.
  • With this in mind, one thicker coat of at least 6 wet mils provides the best combination of ease-of-application and finished product performance.
  • Two thinner coatings (approximately 4 wet mills each) may be desirable if SILRES® BS 720 A will be used to correct irregularities in the substrate or if application temperature and/or humidity are beyond optimal.
  • Apply painter’s tape to create borders for the desired size and shape “board”.
  • Roller or brush application is recommended.  In our experience, a foam roller produces the best results.
  • Apply as much product (up to 8 wet mils) as will adhere without slumping.
  • Removing tape within 2 hours of application is recommended.  Even if you intend to apply a second coat.
  • Product will be dry to the touch in 24 hours.
  • Surface anomalies produced from the wall, brush or roller may be removed with a light sanding after 24 hours.
  • Wipe sanding residue with cheese cloth or tacky rag to remove powder residue before the second coat is applied.
  • Re-tape area before second coat is applied.
  • Remember to remove tape within 2 hours after application.
  • Product will be dry to the touch in 24 hours.
  • Allow product to cure for 3-7 days (longer for lower humidity environments) before placing in service.

The above statements are made for informational purposes only and do not constitute any kind of warranty or guarantee. Proper storage, curing, use, humidity, conditions, and application are the sole responsibility of the user.

储存

The “Best use before end” date of each batch is shown on product label.  Storage beyond the date specified on the label does not necessarily mean the product is no longer usable.  In this case however, the properties required for intended use must be checked for quality assurance reasons.

This product cures with exposure to moisture.  When opened and resealed, the moisture that entered the container will react until completely consumed.  This will form a skin.  The skin may be removed and the remaining content may be used.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 (电话)
+86 21 6130-2500  (传真)
Contact Sales

我们可以为您提供什么帮助?

  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

更多产品

请选择一个应用程序查看您的产品匹配。

购物车

我的媒体


收藏夹

我的产品