此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

很抱歉,本产品在中国大陆无货。请使用产品搜索联系 我们。

VINNAPAS® AN 2014

VINNAPAS® AN 2014 is a fine particle size, aqueous dispersion of a self-crosslinking copolymer of vinyl acetate and an acrylic ester.



特性

  • VINNAPAS® AN 2014 forms a particularly hard and tough elastic film. 
  • It is especially suited as binder for glass fibre fabrics and has excellent adhesion to mineral substrates.

免责声明

所提供之所有信息均基于我们当前所掌握的知识。尽管如此,我们不对其作任何担保、也不承担任何责任,并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外,本免责申明还适用于与第三方权利有关之事宜,尤其是在德国境外。

General

VINNAPAS® AN 2014 can be applied by spray, bath impregnation or foaming.

VINNAPAS® AN 2014 crosslinks at temperatures above 130 °C, but 150 °C is required for optimum durability. After drying and curing at temperatures above 150 °C the polymer forms a tack-free, strong and tough film, with excellent water and alkali resistance. The pH-value of VINNAPAS® AN 2014 is usually sufficient for optimum crosslinking but in exceptional cases the addition of 0.1–0.5 % diammonium phosphate can accelerate the process.

Polymer Dispersions

VINNAPAS® AN 2014 is miscible with most anionic and/or nonionic aqueous polymer dispersion.

VINNAPAS® EN 1092 is recommended as a blending component to soften handfeel notably in glassfiber scrims. However, the compatibility of the mixture should always be tested by undertaking a storage test. 

Fillers and Pigments

If, for coating applications, VINNAPAS® AN 2014 is to be pigmented, only pH neutral fillers and pigments should be used since they would otherwise interfere with the crosslinking process which takes place in the acid pH range. Defoaming Agents Suitable defoaming agents are, for example, 1)SILFOAM® SE1662, SLE or SRE or 2)FOAMASTER® types MO 2134 and MO 2135, 3) Agitan 352.

Their efficacy and compatibility in the formulation chosen should always be checked.

 

1) SILFOAM® is a trademark of Wacker Chemie AG
2) FOAMASTER® is a trademark of BASF SE
3) AGITAN® is a trademark of MÜNZING Chemie GmbH

Thickening Agents

Thickeners which are pH neutral products e.g. cellulose derivatives, polyvinyl alcohol or polyurethane based are especially recommended. VINNAPAS® AN 2014 crosslinks under acidic conditions so that if an alkali thickenable acrylic acid copolymer is to be employed, the pH should be adjusted with ammonia.

 

如果产品不是用于我们推荐的应用, 则购买者应对该产品的选择、加工和使用负全部责任. 此外还应遵守所有的相关法律法规.

Wacker Chemie AG

Hanns-Seidel-Platz 4

D-81737 Munich

Germany

储存

When the dispersion is stored in tanks, proper storage conditions must be maintained. The product has a shelf life of 6 months starting from the date of receipt if stored in the original, unopened containers at temperatures between 5 and 30 °C. Any longer periods for the maximum storage period that may be described in the Certificate of Analysis which accompanies each shipment of the product, take preference over this suggestion in which case the time period stated in the Certificate of Analysis shall be solely authoritative. Iron or galvanized iron containers and equipment are not recommended. Corrosion could result in discoloration of the dispersion or blends made from it in further processing. We therefore recommend the use of containers and equipment made of ceramic, rubberized or enameled materials, appropriately finished stainless steel, or plastic (rigid PVC, polyethylene or polyester resin). As polymer dispersions may tend to superficial film formation, skins or lumps may be formed during storage or transportation. A filtration process is thus recommended prior to utilization of the product.

Preservation for Transport, Storage and further Processing

The product is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package.

Measures should also be taken to ensure cleanliness of the tanks and pipes. In unstirred tanks, a layer of preservative-containing water should be sprayed onto the surface of the dispersion to prevent the formation of unwanted skin and possible attack by microorganisms. The thickness of this water layer should be < 5 mm for low viscosity dispersions and up to 10–20 mm for high viscosity products. Proper procedures – periodic tank cleaning and sanitization – must be set up in order to prevent microbial attack. Contact your biocide representative/supplier for further plant hygiene recommendations. Measures should be taken to ensure that only clean air enters the tank when the dispersion is removed.

Finished products manufactured from polymer dispersions usually also require preservation. The type and scope of preservation will depend on the raw materials used and the anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation. Preservative manufacturers will be able to advise you about the type and dosage of preservative required.

销售和支持

Changsha Port
长沙市开福区新港大道80号
000000 Changsha
中国大陆
+86  400  921-6699 (电话)
Contact Sales

我们可以为您提供什么帮助?

  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

更多产品

产品 技术数据
固体含量 动力粘度 密度 保护性胶体/乳化剂体系 与颜料和填料的相容性 玻璃化温度
VINNAPAS® EN 1689 51 - 53 % 51 - 53 % 50 - 500 mPa·s 50 - 500 mPa·s 大约 1.05 g/cm³ 大约 1,050 lb/gal 表面活性剂 表面活性剂 very good[1] very good[1] 约 -5 °C[2] 约 23.0 °F[2]
说明
[1] 与颜料和填料的相容性 | 专用方法,  [2] 玻璃化温度 | 专用方法 

购物车

我的媒体


收藏夹

我的产品