VINNACEL® 300 is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS/EIFS, tile adhesives and skim coats.

It is based on a hard copolymer of vinylacetate and ethylene which means that it has a neutral effect on rheology and provides the basic properties adhesion and workability, giving a high degree of formulation freedom. VINNACEL® 300 is part of customized range, offering you the best-in-class solution for a wide variety of applications.


  • VINNACEL® 300 is dispersible in water. The product contains a fine mineral filler as an antiblocking agent. It is produced without the addition of organic solvents, plasticizers and film forming agents.
  • Mortars modified with VINNACEL® 300 exhibit improved tensile adhesion strength, adhesion bond strength, flexural strength, anti-abrasion performance and workability.
  • VINNACEL® 300 has no effect on rheological properties and is a general-purpose polymer powder.
  • VINNACEL® 300 is suited to prepare mortars with high cohesion and tensile adhesion strength and provides good bond strength to both, inorganic and organic substrates.

VINNACEL® 300 is recommended for basic dry mix mortar applications. Please discuss more details with your WACKER customer representative.


For the production of ready-mixed dry mortars, blend VINNACEL® 300 with the other dry ingredients in appropriate equipment. During mixing temperatures should not be allowed to rise excessively because otherwise the product could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


如果产品不是用于我们推荐的应用, 则购买者应对该产品的选择、加工和使用负全部责任. 此外还应遵守所有的相关法律法规.

可再分散乳胶粉的颜色可能会有略微的变化, 但不会对产品的功能造成影响.


25 kg paper bags
Big Bags


可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期(该日期优先适用). 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.


Changsha Port
000000 Changsha
+86  400  921-6699 (电话)
Contact Sales


  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question