SMARGO® 814

SMARGO® 814 is a multi-purpose dispersible polymer powder for dry-mix mortars, specifically suited for ETICS applications. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to SMARGO®, a brand of cost-effective quality enhancers for dry-mix mortars.

SMARGO® 814  provides basic properties of adhesion, flexibility and workability, thus offering a high degree of formulation freedom.



特性

  • SMARGO® 814 is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Mortars modified with SMARGO® 814 exhibit improved adhesion, flexural strength deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected. The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • SMARGO® 814 contains a fine mineral filler as antiblocking agent. It is produced without addition of organic solvents, plasticizers or filmforming agents.
  •  

For typical application fields of SMARGO® 814, refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend SMARGO® 814​​​​​​​ with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

包装

SMARGO® 814 is available only as a full truck load (FTL) or full container load (FCL), with 25 kg paper bags being the standard packaging. You also have the option of ordering SMARGO® “bundles” – FTLs or FCLs of different SMARGO® grades combined at various ratios.

储存

可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期(该日期优先适用). 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 (电话)
+86 21 6130-2500  (传真)
Contact Sales

我们可以为您提供什么帮助?

  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

购物车

我的媒体


收藏夹

我的产品