VINNAPAS® EAF 68
VINNAPAS® EAF 68 is a platicizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene and acrylate.
Considering that VINNAPAS® EAF 68 is a pressure sensitive adhesive, it exhibits excellent cohesion even at elevated temperatures.
Notable features of VINNAPAS® EAF 68 are:
- Good shear resistance at high temperatures
- Good adhesion to various materials used for floor coverings including e.g. PVC, linoleum, elastic and textile flooring
VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure sensitive adhesives e. g. self adhesive tapes, films, labels, sound and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as adhesion promoter in adhesive formulations.
If the product is used in applications other than those mentioned, the choice, processing and use of the product is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
For questions concerning food contact status according the chapter 21 CFR (US FDA) and German BfR, please feel free to contact us.Wacker Chemie AG Hanns-Seidel-Platz 4 D-81737 München Germany
When the dispersion is stored in tanks, proper storage conditions must be maintained. VINNAPAS® EAF 68 has shelf life of 6 months starting from the date of receipt if stored in the original, unopened containers at temperatures between 5 and 30 °C. Iron or galvanized-iron equipment and containers are not recommended because the dispersion is slightly acidic. Corrosion may result in discoloration of the dispersion or its blends when further processed. Therefore the use of containers and equipment made of ceramics, rubberized or enameled materials, appropriately finished stainless steel, or plastic (e.g. rigid PVC, polyethylene or polyester resins) is recommended. As polymer dispersion may tend to superficial film formation, skins or lumps may form during storage or transportation. Filtration is therefore recommended to utilization prior of the product.
Preservation for Transport, Storage and further Processing
VINNAPAS® EAF 68 is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package.
Measures should also be taken to ensure cleanliness of the tanks and pipes. In unstirred tanks, a layer of preservative-containing water should be sprayed onto the surface of the dispersion to prevent the formation of unwanted skin and possible attack by microorganisms. The thickness of this water layer should be < 5 mm for low viscosity dispersions and up to 10-20 mm for high viscosity products. Proper procedures - periodic tank cleaning and sanitization - must be set up in order to prevent microbial attack. Contact your biocide representative/supplier for further plant hygiene recommendations. Measures should be taken to ensure that only clean air enters the tank when the dispersion is removed.
Finished products manufactured from polymer dispersions usually also require preservation. The type and scope of preservation will depend on the raw materials used and anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation. Preservative manufacturers will be able to advise you about the type and dosage of preservative required.
DSC, specific method
DIN ISO 2115
|Residual monomer (vinyl acetate)
|VINNAPAS® EAF 68||约 -35.0 °C 约 -31 °F||- -||very tacky very tacky||- -||clear, glossy clear, glossy||very good very good||surface active agents surface active agents||- -||protect from freezing protect from freezing||- -||0 °C 32.0 °F||- -||- -|
|VINNAPAS® EP 7000||约 -3 °C 约 26.6 °F||- -||- -||- -||- -||- -||- -||- -||protect from freezing protect from freezing||- -||- -||- -||- -|
|VINNAPAS® EP 758||- -||约 17 °C 约 62.6 °F||- -||slight dry tack slight dry tack||clear, glossy clear, glossy||very good very good||- -||聚乙烯醇 聚乙烯醇||- -||protect from freezing protect from freezing||4 °C 39.2 °F||< 15 ppm < 15 ppm||< 100 ppm < 100 ppm|