VINNAPAS® 7410 E
VINNAPAS® 7410 E is a hard dispersible polymer powder based on vinyl acetate, ethylene and acrylic acid ester for very good workability and excellent tensile adhesion strength
- VINNAPAS® 7410 E is a polymer powder and is dispersible in water.
- VINNAPAS® 7410 E is ideal for modifying cementitious and gypsum-based mortars, e. g. tile adhesives.
- VINNAPAS® 7410 E contains a fine mineral filler as an antiblocking agent and is produced without the addition of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® 7410 E is a hard dispersible polymer powder and has no effect on rheological properties. It is suitable for formulating high-quality, low-emissions flexible tile adhesive that feature excellent tensile adhesion strength.
For typical application fields of VINNAPAS® 7410 E, refer to the section "application". Please discuss additional applications with your WACKER customer representative.
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 7410 E with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
Slight color variations of the dispersible polymer powder may occure without impairing the product's functionality.
Big Bags or bulk on request.