此内容适用于中国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

很抱歉,本产品在中国无货。请使用产品搜索联系 我们。

VINNAPAS® 5115 L

VINNAPAS® 5115 L is a leveling dispersible polymer powder based on vinyl acetate and ethylene with very good defoaming properties at low viscosity for very smooth, flat surfaces.



特性

  • VINNAPAS® 5115 L is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • As a polymeric binder VINNAPAS® 5115 L will provide very good workability to the fresh mortar.
  • VINNAPAS® 5115 L have improved adhesion<(>,<)> flexural strength, deformability and abrasion resistance.
  • VINNAPAS® 5115 L is a dispersible hard polymer powder and greatly enhances leveling. It contains a fine mineral filler as an antiblocking agent and is produced without the use of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 5115 L is especially advantageous in combination with synthetic superplasticizers or casein for the production of self-leveling flooring compounds and screeds.
  • Special features of VINNAPAS® 5115 L are its very good defoaming properties even without additional defoamer in the mortar formulation: this results in exceptionally smooth, uniform surfaces without air bubbles while also offering high abrasion resistance, flexural and compressive strength.
  • The product can be used to produce self-leveling flooring compounds conforming to strict eco-labeling requirements.
  • Additionally VINNAPAS® 5115 L greatly enhances leveling at low viscosity.

免责声明

所提供之所有信息均基于我们当前所掌握的知识。尽管如此,我们不对其作任何担保、也不承担任何责任,并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外,本免责申明还适用于与第三方权利有关之事宜,尤其是在德国境外。

Protect against moisture.

Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be downloaded via WACKER web site http://www.wacker.com.

Big Bags or bulk on request.

Store in a dry and cool place.


For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5115 L with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


For typical application fields of VINNAPAS® 5115 L, refer to the "Application" section. Please discuss additional applications with your WACKER customer representative.

包装

25 kg paper bags
Big Bags or bulk on request.

储存

During storage, protect VINNAPAS® 5115 L from contact with moisture. Prolonged storage at temperatures above 30 °C, including in combination with pressure load, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them in suitable conditions. We recommend storing VINNAPAS® 5115 L in a warehouse that provides cool and dry conditions. Do not store VINNAPAS® 5115 L for more than six months, starting from the point at which it was received. If the product is kept for longer than that, it can still be used, but users are advised, in this case, to check the properties required for the intended use.

销售和支持

Changsha Port
长沙市开福区新港大道80号
000000 Changsha
中国
+86  400  921-6699 (电话)
Contact Sales

我们可以为您提供什么帮助?

    您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

更多产品

没有找到类似的产品