很抱歉,本产品在中国大陆无货。请使用产品搜索联系 我们。

VINNAPAS® 4019 E

VINNAPAS® 4019 E is ideally suited for formulating tile adhesives with optimum adhesion to wood and a superior water resistance (ANSI 118.4, ANSI 118.11).



特性

  • VINNAPAS® 4019 E is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • VINNAPAS® 4019 E is a high-quality polymeric binder in the medium Tg range.
  • Is specifically formulated to provide excellent adhesion in multipurpose thin set tile mortars, even at lower polymer modification.
  • Adhesion over plywood using VINNAPAS® 4019 E is excellent as well as adhesion to vitrified tiles.
  • Adhesion after water immersion remains on a high level.
  • VINNAPAS® 4019 E is suitable for formulating compounds of high ultimate strength.

免责声明

所提供之所有信息均基于我们当前所掌握的知识。尽管如此,我们不对其作任何担保、也不承担任何责任,并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外,本免责申明还适用于与第三方权利有关之事宜,尤其是在德国境外。

Store in a dry and cool place.

Protect against moisture.

Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be downloaded via WACKER web site http://www.wacker.com.

Big Bags or bulk on request.


For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4019 E with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


For typical application fields of VINNAPAS® 4019 E, refer to the "Application" section.  Please discuss additional applications with your WACKER customer representative.
 

包装

25 kg paper bags
Big Bags or bulk on request.

储存

可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期(该日期优先适用). 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.

销售和支持

Changsha Port
长沙市开福区新港大道80号
000000 Changsha
中国大陆
+86  400  921-6699 (电话)
Contact Sales

我们可以为您提供什么帮助?

  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

更多产品

请选择一个应用程序查看您的产品匹配。

购物车

我的媒体


收藏夹

我的产品