很抱歉,本产品在中国大陆无货。请使用产品搜索联系 我们。

VINNAPAS® 315

VINNAPAS® 315 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of +17 °C that offers high heat resistance and high tensile strength.



特性

VINNAPAS® 315 is designed for use as a base for high-speed packaging adhesives. It exhibits very high wet tack and high thickening response. Because of its poly(vinyl alcohol) stabilization and excellent mechanical stability, this dispersion has clean machining and can be used in a variety of roll, extruder or spray applications. The formaldehyde content of this dispersion is very low as it is manufactured with chemicals that do not generate formaldehyde. The dry VINNAPAS® 315 film is tack-free and heat-sealable. The higher T g gives the dried adhesive film both very high heat resistance and high tensile strength while maintaining greater flexibility than poly(vinyl acetate) films. The initial adhesive strength is excellent and maintains this strength even after aging. VINNAPAS® 315 exhibits good water resistance and excellent plasticizer migration.

VINNAPAS® 315的特殊性能

  • 生产过程中未使用APEO
  • 甲醛含量低

免责声明

所提供之所有信息均基于我们当前所掌握的知识。尽管如此,我们不对其作任何担保、也不承担任何责任,并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外,本免责申明还适用于与第三方权利有关之事宜,尤其是在德国境外。

Protect against frost.


VINNAPAS® 315 is compatible with other poly(vinyl alcohol) and surfactant stabilized vinyl acetate-based dispersions and acrylic copolymers. It is also compatible with rubber latices, water based urethane dispersions, solvents, plasticizers, and other modifiers. VINNAPAS® 315 thickens rapidly to high viscosity with the addition of plasticizers and/ or solvents. The addition of plasticizers to VINNAPAS® 315 will improve the specific adhesion, water resistance, and setting speed. VINNAPAS® 315 can be further crosslinked through the hydroxyl functionality of the poly(vinyl alcohol) with materials such as glyoxal, boric acid, and isocyanates.


VINNAPAS® 315 is an excellent base for adhesive formulators and can be used in a wide variety of applications. Its rapid setting speed is useful in carton, case forming, and sealing applications. The natural affinity of the dispersion to coated stocks as well as kraft and its good water resistance make this dispersion suitable for bag seams, cups, tube winding, and high pressure laminates. It can also be used for application areas which include but are not limited to bookbinding, padding, laminations of leather to cloth and fiberglass to paper, craft glues, microwave packaging, envelope back gums and rug backing.

储存

When the dispersion is stored in tanks, proper storage conditions must be maintained. If stored in the original, unopened containers at cool (below 30 °C), but frost-free temperatures the product has a shelf life of 9 months from the date of manufacture. Any longer periods for the maximum storage period that may be described in the Certificate of Analysis which accompanies each shipment of the product, take preference over this suggestion in which case the time period stated in the Certificate of Analysis shall be solely authoritative. Iron or galvanized-iron equipment and containers are not recommended because the dispersion is slightly acidic. Corrosion may result in discoloration of the dispersion or its blends when further processed. Therefore, the use of containers and equipment made of ceramics, rubberized or enameled materials, appropriately finished stainless steel, or plastic (e.g. rigid PVC, polyethylene or polyester resin) is recommended. As polymer dispersions may tend to superficial film formation, skins or lumps may form during storage or transportation. Filtration is therefore recommended prior to utilization of the product.

Preservation for Transport, Storage and further Processing

The product is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package. To maintain proper storage conditions appropriate measures should also be taken to ensure cleanliness of the tanks and pipes. In a storage tank in which the product is not stirred, it is advisable to contact your biocide representative/supplier. Proper procedures must be set up in order to prevent microbial attack between necessary periodic tank cleaning and sanitization. These procedures will vary, since loading and unloading practices in each storage situation will differ slightly. Finished products manufactured from polymer dispersions usually also require preservation. The type and scope of preservation will depend on the raw materials used and the anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation. Preservative manufacturers will be able to advise you about the type and dosage of preservative required.

销售和支持

Changsha Port
长沙市开福区新港大道80号
000000 Changsha
中国大陆
+86  400  921-6699 (电话)
Contact Sales

我们可以为您提供什么帮助?

  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

更多产品

产品 技术数据
固体含量 动力粘度 密度 保护性胶体/乳化剂体系 与颜料和填料的相容性 断裂伸长率 玻璃化温度
VINNAPAS® 320 KR (ULS) - - 1800 - 2700 mPa·s 1800 - 2700 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal PVOH PVOH very good[1] very good[1] - - 约 14 °C[2] 约 57.2 °F[2]
VINNAPAS® 920 54.0 - 56.0 % 54.0 - 56.0 % 800 - 2000 mPa·s 800 - 2000 mPa·s 1.05 g/cm³ 1,050 lb/gal PVOH and surfactant PVOH and surfactant - - - - 约 -20 °C[3] 约 -4.0 °F[3]
VINNAPAS® EP 6300 62.0 - 64.0 % 62.0 - 64.0 % 600 - 1500 mPa·s 600 - 1500 mPa·s 1.06 g/cm³ 1,060 lb/gal PVOH and surfactant PVOH and surfactant - - - - 约 0 °C[3] 约 32.0 °F[3]
VINNAPAS® EP 6420 54.0 - 56.0 % 54.0 - 56.0 % 3500 - 5500 mPa·s 3500 - 5500 mPa·s 大约 1.065 g/cm³ 大约 1,065 lb/gal PVOH PVOH excellent[1] excellent[1] - - 约 2 °C[2] 约 35.6 °F[2]
VINNAPAS® EP 7000 69.5 - 71.5 % 69.5 - 71.5 % 1200 - 2700 mPa·s 1200 - 2700 mPa·s 1.05 g/cm³ 1,050 lb/gal - - - - - - 约 -3 °C[3] 约 26.6 °F[3]
VINNAPAS® EP 701K 54.0 - 56.0 % 54.0 - 56.0 % 2000 - 4000 mPa·s 2000 - 4000 mPa·s 大约 1.06 g/cm³ 大约 1,060 lb/gal 聚乙烯醇 聚乙烯醇 excellent[1] excellent[1] - - 约 -10 °C[2] 约 14.0 °F[2]
VINNAPAS® EP 701K (NJG) 54.0 - 56.0 % 54.0 - 56.0 % 2000 - 4000 mPa·s 2000 - 4000 mPa·s - - - - - - - - 约 -10 °C[2] 约 14.0 °F[2]
VINNAPAS® EP 705A (ULS) 54 - 56 % 54 - 56 % 1900 - 2800 mPa·s 1900 - 2800 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal PVOH PVOH very good[1] very good[1] - - 约 0 °C[2] 约 32.0 °F[2]
VINNAPAS® EP 705K (ULS) 54 - 56 % 54 - 56 % 2900 - 3900 mPa·s 2900 - 3900 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal PVOH PVOH very good[1] very good[1] - - 约 0 °C[2] 约 32.0 °F[2]
VINNAPAS® EP 706 54 - 56 % 54 - 56 % 3500 - 4500 mPa·s 3500 - 4500 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal PVOH PVOH very good[1] very good[1] - - 约 0 °C[2] 约 32.0 °F[2]
VINNAPAS® EP 706K (NJG) > 54.5 % > 54.5 % 4400 - 5400 mPa·s 4400 - 5400 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal 聚乙烯醇 聚乙烯醇 very good[1] very good[1] 约 600 %[4] 约 600 %[4] 约 0 - 4 °C[2] 约 32.0 - 39.2 °F[2]
VINNAPAS® EP 707K (NJG) > 54.5 % > 54.5 % 1300 - 2000 mPa·s 1300 - 2000 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal 聚乙烯醇 聚乙烯醇 very good[1] very good[1] 约 600 %[4] 约 600 %[4] 约 -2 - 2 °C[2] 约 28.4 - 35.6 °F[2]
VINNAPAS® EP 708 (NJG) 54.5 - 56.5 % 54.5 - 56.5 % 6000 - 7500 mPa·s 6000 - 7500 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal 聚乙烯醇 聚乙烯醇 very good[1] very good[1] 约 600 %[4] 约 600 %[4] 约 0 - 4 °C[2] 约 32.0 - 39.2 °F[2]
VINNAPAS® EP 708 (ULS) 54.5 - 56.5 % 54.5 - 56.5 % 6500 - 8000 mPa·s 6500 - 8000 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal 聚乙烯醇 聚乙烯醇 very good[1] very good[1] 约 600 %[4] 约 600 %[4] 约 0 - 4 °C[2] 约 32.0 - 39.2 °F[2]
VINNAPAS® EP 709 54 - 56 % 54 - 56 % 2700 - 3700 mPa·s 2700 - 3700 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal PVOH PVOH very good[1] very good[1] - - 约 7 °C[2] 约 44.6 °F[2]
VINNAPAS® EP 710 > 54.5 % > 54.5 % 4400 - 5400 mPa·s 4400 - 5400 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal 聚乙烯醇 聚乙烯醇 very good[1] very good[1] 约 600 %[4] 约 600 %[4] 约 0 - 4 °C[2] 约 32.0 - 39.2 °F[2]
VINNAPAS® EP 724 54 - 56 % 54 - 56 % 1500 - 2500 mPa·s 1500 - 2500 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal PVOH PVOH very good[1] very good[1] - - 约 19 °C[2] 约 66.2 °F[2]
VINNAPAS® EP 756 54.5 - 56.5 % 54.5 - 56.5 % 600 - 2000 mPa·s 600 - 2000 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal 聚乙烯醇 聚乙烯醇 very good[1] very good[1] - - 约 0 - 4 °C[2] 约 32.0 - 39.2 °F[2]
VINNAPAS® EP 758 59.5 - 61.5 % 59.5 - 61.5 % 3500 - 5500 mPa·s 3500 - 5500 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal 聚乙烯醇 聚乙烯醇 very good[1] very good[1] - - 约 17 °C[2] 约 62.6 °F[2]
VINNAPAS® EP 760 59.5 - 61.5 % 59.5 - 61.5 % 2000 - 3000 mPa·s 2000 - 3000 mPa·s 大约 1.07 g/cm³ 大约 1,070 lb/gal PVOH PVOH excellent[1] excellent[1] - - 约 0 °C[2] 约 32.0 °F[2]
说明
[1] 与颜料和填料的相容性 | 专用方法,  [2] 玻璃化温度 | 专用方法,  [3] 玻璃化温度 | DSC, specific method,  [4] 断裂伸长率 | DIN EN ISO 527-3 

购物车

我的媒体


收藏夹

我的产品