此内容适用于中国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

SILRES® BS 30 A

SILRES® BS 30 A is a stable, VOC compliant, 100% actives siloxanes/ silicone resin blend that imparts water and stain repellency to substrates while providing an enhanced look. SILRES® BS 30 A, currently produced in the USA, was developed to treat a wide variety of mineral substrates commonly used in the tile industry including tumbled marble , limestone, slate, and saltillo clay tile.



特性

  • Provides excellent water repellency to reduce cracking, spalling, freeze/thaw damage, chemical degradation, biological growth, efflorescence, and dirt pickup, thereby lengthening substrate life and reducing maintenance costs.
  • Provides excellent stain repellency to reduce chemical degradation and biological growth for improved aesthetics, thereby lengthening substrate life and reducing maintenance time and expenses.
  • Superior storage stability including freeze/thaw stability for ease of use.
  • Low VOC emissions upon curing.  
  • Formulated to impart an enhanced appearance on stone and natural tile substrates.
  • Formulated to provide either a matte finish or a gloss finish, depending upon application.
  • Physically and chemically bonds to substrates increasing coating life and making cleaning easier, thereby reducing maintenance costs.
  • Coatings are UV stable and resistant to biological degradation for longer service life leading to less cost for repetitive applications.
  • Coatings are vapor permeable to resist cracking, peeling and blistering.

免责声明

所提供之所有信息均基于我们当前所掌握的知识。尽管如此,我们不对其作任何担保、也不承担任何责任,并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外,本免责申明还适用于与第三方权利有关之事宜,尤其是在德国境外。


Surface Preparation


Surface preparation depends on substrate placement, type and strength, curing and finishing processes, age, condition, previous contamination, and the presence of existing coatings as well as the application of SILRES® BS 30 A. Surfaces should be clean from dust, dirt, oils, grease, curing compounds, other coatings, efflorescence, and laitance before applying SILRES® BS 30 A. Cleaning methods which are compatible with the application of SILRES® BS 30 A include:


Mechanical - abrasive blasting (sand, baking soda, vacuum).


Chemical - acid etching, stripping, solvent de-greasing, caustic soda scrubbing, alkaline soap scrubbing, high pressure washing, high pressure washing with sand.


Heat - propane and acetylene torching.


If strongly acidic or caustic cleaning agents are used, neutralize the surface and completely wash to remove any residues. Before using any surface preparation method, a test patch should be performed with the customer's approval to ensure that their needs are met.


SILRES® BS 30 A should be applied as supplied to achieve the desired application effect. One to two coats of the solution should be applied to achieve an enhanced appearance. Two to three coats of the solution should be applied to achieve an enhanced appearance with gloss. SILRES® BS 30 A can be applied with a soft, lint-free cloth, sponge, or paint brush. Excess material should be removed to prevent inconsistencies in the enhancement. The product should be fully cured within 24 hours.


A test patch should be performed prior to general application with the customer's approval to ensure the desired appearance is achieved.


Recoatability


Substrates which are coated with SILRES® BS 30 A are generally re-coatable with solvent borne coatings. A test patch should be performed prior to general application with the customer's approval to ensure that desired appearance is achieved.


Clean Up


Thoroughly rinse application equipment with solvent.


Disposal


SILRES® BS 30 A must be disposed of according to local, state and federal regulations. SILRES® BS 30 A and its dilutions should be treated as dilute solutions of "silicone resins" which are non-RCRA (Resource Conservation and Recovery Act) or non-hazardous wastes.

储存

SILRES® BS 30 A must be stored in tightly closed containers, protected from sunlight and stored at temperatures between 32°F (0°C) and 100°F (38°C). This product cures with exposure to the atmosphere. The original package contains a nitrogen blanket. Subsequent handling or packaging should include replacement of the blanket in each container.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国
+86  21  6130-2000 (电话)
+86 21 6130-2500  (传真)
Contact Sales
网站

我们可以为您提供什么帮助?

    您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

更多产品

没有找到类似的产品