ELASTOSIL® M 4670 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Making shrink-free molds with excellent reproduction accuracy.
Food contact (FDA/ BfR compliant).
特性
- good flow
- fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
- high Shore A hardness (approx. 55)
- high tear strength
- long-term stability of the vulcanizate’s mechanical properties
- outstanding resistance to common casting resins
ELASTOSIL® M 4670 A/B的特殊性能
- 加成固化
- 双组分
- 无化学收缩
- 易流动的
- 符合BfR
- 符合FDA
- 耐环氧树脂
- 耐聚氨酯
- 耐聚酯纤维
- 表面干燥
- 食品接触
Due to its outstanding resistance to casting resins as well as its superior mechanical properties ELASTOSIL® M 4670 A/B is perfectly suitable for all molds of models with undercuts that are to be reproduced in casting resins, and a certain inherent rigidity of the molds is required.
As a high-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4670 A/B is also extremely suitable for casting all other common reproduction materials, particularly if absolutely accurate copies of models with undercuts are required.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.
Important note:
The platinum catalyst is in component A.
Caution:
A and B components may only be used together if they have the same batch number.
储存
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）