ELASTOSIL® M 4642 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: making shrink-free molds with excellent reproduction accuracy.
- Dark red
- very good flow
- fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
- medium Shore A hardness (approx. 37)
- high tear strength
- long-term stability of the vulcanizate’s mechanical properties
- outstanding resistance to common casting resins
ELASTOSIL® M 4642 A/B的特殊性能
Due to its outstanding resistance to casting resins as well as its superior mechanical properties ELASTOSIL® M 4642 A/B is perfectly suitable for all molds of models with undercuts that are to be reproduced in casting resins, and a certain inherent rigidity of the molds is required.
As a medium-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4642 A/B is also extremely suitable for casting all other common reproduction materials, particularly if absolutely accurate copies of models with undercuts are required.
The platinum catalyst is in component B.
A and B components may only be used together if they have the same batch number.
Comprehensive instructions are given in our leaflet ROOM TEMPERATURE VULCANIZING (RTV) SILIONES – Material and Processing Guidelines
Detailed information on other mold-making compounds in the ELASTOSIL ® M range is contained in our brochure “ELASTOSIL® Silicone Rubber for Mold Making”.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.