ELASTOSIL® M 4110 US A/B
Pourable, addition-curing, 1:1 two-component silicone rubber that vulcanizes at room temperature.
特性
- Very good flow
- Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
- Soft (Shore A approx. 8)
- Excellent long-term stability
- Great resistance to common casting resins
ELASTOSIL® M 4110 US A/B is especially suitable for preparing glove molds, i.e. one part skin molds.
The benefits are easy and quick mold making as well as straight forward demolding and seamless copies. Hence no further rework of the reproduction is required and process time is being extensively reduced.
As a low-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4110 US A/B is also extremely suitable for casting all other common reproduction materials, particularly if absolutely accurate copies of models with pronounced undercuts are required.
Important
The platinum catalyst is contained in component A.
Caution
Only components A and B with the same lot number may be processed together!
To ensure optimum flow of the material, the components must be stirred thoroughly before they are removed or processed in their containers.
The tables below indicate the pot lives and curing times at various temperatures.
The pot life figures indicate the time required for the mix to reach a viscosity of 60 000 mPa s.
The curing times apply to a layer thickness of 0.40".
储存
The "Best use before end date" of each batch is shown on the Certificate of Analysis.
Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）