ELASTOSIL® N 2010
ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant, which cures at room temperature under the influence of moisture.
- neutral curing system (alkoxy)
- primerless adhesion to many substrates
- solvent free
ELASTOSIL® N 2010的特殊性能
General-purpose potting and coating grade for technical applications.
ELASTOSIL® N2010 is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. Good adhesion to plastics and metals in combination with a elasticity and durability open up a wide range of potential uses.
The consistency of the uncured material allows processing by dipping, spraying, dispensing. ELASTOSIL® N2010 exhibits outstanding resistance to weathering, ageing, moisture, and UV light. The vulcanized silicone rubber permanently remains elastic over a wide temperature range from -50 °C to +180 °C (-58 to +356°F).
If removing of silicone rubber from machines or dispensing equipment is necessary, white spirit is recommended as a solvent. However, cleaning should take place before the rubber is fully cured.
Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.