ELASTOSIL® R plus 4060/60 MH
ELASTOSIL® R plus 4060/60 MH is an addition-curing, one-component high consistency silicone rubber for the manufacture of molded articles. Cured articles exhibit high elasticity and low compression set.
ELASTOSIL® R plus 4060/60 MH is a fast curing silicone rubber exhibiting excellent tear resistance. Thanks to addition cure, the vulcanization reaction is significantly faster compared to peroxide curing materials. No peroxide decomposition products are formed during vulcanization. ELASTOSIL® R plus 4060/60 MH exhibits lower compression set and superior elasticity in comparison with other platinum curing grades (e.g. ELASTOSIL® R plus 4001).
At service temperatures above approx. 180 °C the addition of heat stabilizers is recommended. Further information about an improvement of the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or the latest edition of our brochures.
ELASTOSIL® R plus 4060/60 MH的特殊性能
ELASTOSIL® R plus 4060/60 MH is suited for the manufacture of molded articles.
Properly cured and post-cured vulcanizates of ELASTOSIL® R plus 4060/60 MH can be used for food contact applications and are suitable for use under the Recommendation "XV. Silicones" of the BfR and FDA 21 CFR §177.2600 "Rubber Articles Intended for Repeated Use" considering any given limitations on extractable and volatile substances.
ELASTOSIL® R plus 4060 is particularly suited for press-curing or processing on a silicone rubber injection molding machine.
CAUTION! Danger of deactivation!
The platinum catalyst can be deactivated by e.g. amines or sulfur compounds.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
This product is available in 20 kg and 540 kg cardboard packaging.
Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.
Please store the cardboard boxes in a dry and cool place. Once opened, cardboard boxes should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.