ELASTOSIL® R 760/70 MH
ELASTOSIL® R 760/70 is a peroxide curing silicone rubber with very high green-strength, which enhances calendering and extrusion performance significantly. Uncured extruded hoses show high dimension stability and non-sticky surface.
ELASTOSIL® R 760/70 is a high green-strength peroxide curing silicone rubber.
The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.
Further information about an improvement of the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or the latest edition of our brochures.
ELASTOSIL® R 760/70 MH的特殊性能
ELASTOSIL® R 760/70 is particularly suitable for the economical production of turbo charger hoses which are used in the automotive industry.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
|Shore density A||Breaking strength||断裂伸长率||Tear-growth resistance||压缩变形|
|ELASTOSIL® R 760/70 MH||70 70||10.7 N/mm² 10.7 N/mm²||530 % 530 %||27 N/mm 27 N/mm||9 % 9 %|
 Shore density A | DIN ISO 48-4,  Breaking strength | ISO 37 type 1,  断裂伸长率 | ISO 37 type 1,  Tear-growth resistance | ASTM D 624 B,  压缩变形 | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C