ELASTOSIL® N 198 GREY US
ELASTOSIL® N 198 GREY US is a non-slump, RTV-1 oxime cure silicone rubber that cures on contact with moisture in the air.
- Neutral cure
- Primerless adhesion to most substrates
- Available in Black or Gray
ELASTOSIL® N 198 GREY US is intended for sealing and adhering electronic devices and components. It is a general purpose adhesive in FIPG and CIPG applications for the electronics industry.
ELASTOSIL® N 198 GREY US is noncorrosive to most metals such as ferrous metal, silver, gold, tin and aluminum. Staining may occur on copper and brass in confined areas. Prior testing is recommended.
Further research has shown that in a confined area of <1L of volume with no ventilation and a relative humidity in that volume of 56 to 80%,the by-product of cure from ELASTOSIL® N 198 GREY US will result in corrosion of copper beneath the staining.
ELASTOSIL® N 198 GREY US can be readily dispensed from bulk containers using conventional drum and pail pumps equipped with a high pressure flexible fluid hose and extrusion gun.
The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.