E210 is a specially formulated emulsion of an organofunctional silicone blend developed for release in molding operations. E210 offers cost savings to the end user by providing more effective performance at lower usage levels, by decreasing the number of rejected parts, or by enhancing the life of the end product.
- Superior stability
- Ultra fine particle size
- Ease and versatility of application
- Absence of fire hazard
E210 may be applied by brush or by conventional spraying equipment. It can be diluted to low concentrations (0.5% to 2.5% solids) and used directly on the mold. However, if used as supplied, care should be taken to avoid over application. The number of releases per application will depend upon the type of plastic, design of the mold, and the curing temperature of the plastic. Usually a small experimental test should be performed prior to any production scale-up.
E210 may cause "fish-eyes" when applied to plastics intended to be painted, unless it is completely removed by cleaning the part with solvent (aromatic or chlorinated hydrocarbon), washing with detergent, or immersing in potassium hydroxide solution.