此内容适用于中国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

很抱歉,本产品在中国无货。请使用产品搜索联系 我们。

SILRES® BS 1316

SILRES® BS 1316 is used undiluted as a water-repellent primer and impregnating agent for normal and reinforced concrete.

SILRES® BS 1316 is a mixture of isomeric octyltrimethoxysilanes with isooctyltrimethoxysilane as main component.



特性

  • greatly delays chloride and water absorption by concrete
  • reduces loss of concrete due to freeze / thaw action in the presence of de-icing salt
  • high resistance to alkalis
  • good depth of penetration
  • low volatility

After application to the concrete, SILRES® BS 1316 reacts with the atmospheric moisture and pore water in the concrete, thereby generating the active ingredient while liberating alcohol. The active ingredient greatly lowers the water absorbency of the treated concrete, which nevertheless retains a very high degree of water vapour permeability since neither pores nor capillaries are clogged.

免责声明

所提供之所有信息均基于我们当前所掌握的知识。尽管如此,我们不对其作任何担保、也不承担任何责任,并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外,本免责申明还适用于与第三方权利有关之事宜,尤其是在德国境外。


SILRES® BS 1316 is recommended as a water-repellent impregnating agent and primer for normal and reinforced concrete for bridges, roads and buildings.

Processing

Liberally apply two coats (wet-on-wet) of the impregnating agent uniformly to the concrete. Two coats are needed to ensure that all of the surface is covered. Do not allow puddles to form.

Apply as usual with a low-pressure airless spray, allowing the impregnating agent to flood over the surface. Perhaps use a roller afterwards to distribute the impregnating agent more evenly.

- Allow fresh concrete at least four weeks (preferably six) to set before impregnating it.
- Remove coarse particles and dust from new, unsoiled surfaces with a brush or compressed air. Use superheated steam to clean weathered surfaces that are heavily soiled with oil, abraded rubber, etc., prior to treatment.
- Only impregnate concrete that has a uniformly dry surface with no damp patches. Should it suddenly start to rain, stop treatment and cover the impregnated areas.

Dilution

SILRES® BS 1316 is normally used undiluted.

储存

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国
+86  21  6130-2000 (电话)
+86 21 6130-2500  (传真)
Contact Sales
网站

我们可以为您提供什么帮助?

    您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

更多产品

请选择一个应用程序查看您的产品匹配。