此内容适用于中国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗?

SEMICOSIL® 987 GR

SEMICOSIL® 987 GR is a non-slump, thermally curable, addition curing, one-part silicone elastomer which can be used as sealing adhesive

 



特性

Special characteristics

  • One-part, ready-to-use, heat curing silicone
  • Thixotropic
  • High flexibility (low-stress-adhesive) for FIPG bonding
  • Primerless adhesion to many substrates

 

 

 

免责声明

所提供之所有信息均基于我们当前所掌握的知识。尽管如此,我们不对其作任何担保、也不承担任何责任,并且保留在任何时候进行技术变更的权利。购买方应在预测试中对所提供之信息以及产品在既定应用中的适应性进行检查。任何时候都必须以合同条款与条件为准。此外,本免责申明还适用于与第三方权利有关之事宜,尤其是在德国境外。

  • General purpose sealing adhesive 
  • Electronics industry
  • FIPG - sealing of electronic control unit substrates (cover, housing)
  • Supports mass production processes with end-of line QC-control

 

 

SEMICOSIL 987 GR can be applied as sealing adhesive for FIPG bonding of thermoplastics (Polybutylenterephthalates, Polyamides) and metals (Al, steel) for mass production processes.

On suitable substrates adhesion built up is accomplished via chemical linkages to polar anchor groups of the substrate. Examples for processing concepts are given in the following.

 

As type of substrates, concentration and accessability of functional anchor groups may vary, it is highly recommended that customers carry out adhesion tests for in-line quality check and adhesion performance after aging before fixing processing parameters. It is customers responsibility to check fitness for the specifc application and to ensure reproducability of surface quality.

 

 

 

 

SEMICOSIL® 987 GR  shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions are given in our leaflet „ Room Temperature Vulcanizing (RTV) Silicones (Materials and Processing Guidelines)” which can be downloaded from WACKER Chemie AG website.

All equipment and surfaces must be clean and free of contaminants that will prevent adhesion and/or inhibit the cure of SEMICOSIL® 987 GR.

Separation layers on bonding substrated may be formed from residues of previous processes, from migrating additives or unintended contaminations. Examples of separating molecules among others can be processing fluids or deforming agents that are not able to built chemical links to reactive and accessible anchor groups of the substrate surface or to the silicone elastomer. Examples of inhibiting contaminants are sulfur containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds – especially organotin compounds. If a substrate’s ability to inhibit cure or built up adhesion is unknown, a small scale test should be run to determine compatibility.

Safeguarding of reproducable and suitable surface quality is recommended. State of the art methods include in-line surface pretreatments like plasma processes or laser pretreatment.

Because of the pronounced shear thinning effect  SEMICOSIL® 987 RB GR can be dispensed easily with all dispensing equipments.

Since silicones dissolve notable amounts of air, an in-line degassing is recommended.

SEMICOSIL® 987 GR works best when cured at 125 °C or more.

Curing time should be adapted to the size and heat sink properties of the components and parts. The term "curing" time describes the time needed for solidification of the material. For typical substrates adhesion built-up is accomplished within this time, which can be observed by cohesive failure upon adhesion test.

However, depending on the surface quality of the bonding surfaces, time to adhesion might differ from given curing profiles.

In the interest of robust processing it is highly recommended that for selected curing temperatures & times aging tests on specific customers parts  are carried out to storage safeguard the process.

储存

The 'Best use before end' date of each batch is shown on the product label.

SEMICOSIL® 987 GR  should be stored between +5 and +25°C in the tightly closed original container.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国
+86  21  6130-2000 (电话)
+86 21 6130-2500  (传真)
Contact Sales
网站

我们可以为您提供什么帮助?

    您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

您是否需要产品样本?

您可以在此处索取产品样本。

索取样本

更多产品

请选择一个应用程序查看您的产品匹配。