ELASTOSIL® AUX STABILIZER H0
ELASTOSIL® AUX STABILIZER H0 is a ready-to-use compound consisting of a heat stabilizing filler and a reactive silicone polymer which is typically contained in ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer during vulcanization and does not show any migration.
Paste consistency, can easily be incorporated into ELASTOSIL® R and R plus mixtures on two-roll mills.
No impairment of Elastosil® R and R plus grades when concentration recommendations are observed.
Compatible with curing agents ELASTOSIL® AUX CURING AGENT C1, C6 and E as well as ELASTOSIL® AUX BATCH PT 1 and PT 2.
Opaque additive: allows application in colored silicone systems
ELASTOSIL® AUX STABILIZER H0的特殊性能
ELASTOSIL® AUX STABILIZER H0 can extend the service life of silicone elastomers at temperatures up to 225°C.
ELASTOSIL® AUX STABILIZER H0 is incorporated into ELASTOSIL® R and R plus high-consistency rubber using common mixing techniques. Good results are obtained by incorporating the curing agent at the same time.
The recommended concentration of ELASTOSIL® AUX STABILIZER H0 is 2%. Increasing the recommended concentration does not further improve the heat resistance of the compound. At high concentrations of ELASTOSIL® AUX STABILIZER H0 a slightly decrease in hardness values may be obtained with compounds of silicone bases with high Shore A hardness values.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
This product is available in 1 kg can and 20 kg pail.
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.