WACKER® eco CROSSLINKER V 90
WACKER® eco CROSSLINKER V 90 is a solventfree Hydrogenpolysiloxane containing reactive Si-H groups.
WACKER® eco CROSSLINKER V 90 is based on renewable raw materials according to “Standard REDcert²”. In the WACKER® eco CROSSLINKER V 90manufacturing process, the use of fossil-based raw materials is compensated 100% by biomethanol from renewable resources.
- fast curing
- good release stability
- excellent anchorage to a wide variety of substrates
- fast cure properties of WACKER® eco CROSSLINKER V 90 allow for a low platinum concentration
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be downloaded via WACKER web site http://www.wacker.com.
WACKER® eco CROSSLINKER V 90 is used for curing addition crosslinking solvent-based and solvent-free DEHESIVE®-systems.
Batches of coating compound must be prepared in the order given below.
1. First pour in CRA® Modifier in case CRA® is used.
2. Add DEHESIVE® polymer in several portions and stir slowly until the mixture is homogeneous.
3. Thoroughly stir in WACKER® eco CROSSLINKER V 90 to this mixture.
4. Slowly stir in catalyst.
Local over-concentrations of Platinum needs to be avoided.
Any contact to alkaline systems needs to be avoided.
Store in a dry and cool place.
The 'Best use before end' date of each batch is printed on the product label.
Storage in unopened original packaging beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.