This product is not available in United States. Please use the product search or contact us.

WACKER® 465 - FIRE RETARDANT

WACKER® 465 - FIRE RETARDANT is a one-component, neutral-curing, fire retardant, low modulus silicone sealant with outstanding adhesion, long shelf life, excellent tooling characteristics and very good fire retardant properties for construction, glass and window building, as well as industrial applications.

 WACKER® 465 - FIRE RETARDANT cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.



Properties

  • fire retardant
  • excellent weatherability
  • excellent tooling characteristics for professional use
  • non-corrosive to metals
  • suitable for alkaline substrates such as concrete, mortar, fibrous cement
  • matt finish
  • excellent adhesion on most substrates without primer
  • solvent-free, thus featuring low volume shrinkage during vulcanization
  • ready gunnability at low (+ 5 °C) and high (+ 40 °C) temperatures
  • flexible at low (-40 °C) and high temperatures (+150 °C)
  • almost odorless
  • non-sag

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Application fields

  • sealing of connection and expansion joints in the building industry
  • sealing of perimeter joints
  • sealing of joints between glazing and supporting structures (frames, transoms, mullions)
  • Industrial application as sealant in the automotive, aircraft and shipbuilding industries

 

Processing

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth. For application from cartridges cut thread open, fix nozzle on top and cut to required bead size. The sealant can be applied in beads or layers. It requires moisture in order to cure.
The curing time can take longer at lower temperatures, lower humidity or by low volume of air exchange.

 

Certification

WACKER® 465 - FIRE RETARDANT is certified and classified according to

  • ISO 11600 F/G, Class 25LM
  • EN 15651-1, Class 25LM F-EXT-INT-CC
  • EN 15651-2, Class 25LM G-CC
  • ASTM C920, Class 50/50
  • EN 13501-1, Class B-s2,d0
  • EN 13501-2, Class E 240-H-X-F- W15-25
  • EN 13501-2, Class EI 240-H-X-F- W15-25
  • EN 13501-2, Class E 240-V-X-F- W5-25
  • EN 13501-2, Class EI 240-V-X-F- W5-25

 

Adhesion

WACKER® 465 - FIRE RETARDANT exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel, glazed tiles); metals (e.g. aluminum, steel, zinc or copper); impregnated, varnished or painted wood; and many plastics.

Users must carry out their own tests due to the great variety of substances. The adhesion can be improved in many cases by pretreatment of the substrates with a primer. If adhesion difficulties arise please contact our technical service.

 

Restrictions on use

It is the user's responsibility to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Because of the multitude of these materials. Wacker cannot make a general statement to the compatibility of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.

WACKER® 465 - FIRE RETARDANT must not be used for insulating glass applications.

 WACKER® 465 - FIRE RETARDANT should not be used in contact with prestressed polyacrylate elements as it may cause stress cracking.

WACKER® 465 - FIRE RETARDANT must not be used for sealing of aquaria or for longer-term use under water. WACKER® 121 - AQUARIUM has been specifically developed for aquarium applications.

WACKER® 465 - FIRE RETARDANT is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining. In this case use an alternative grade such as WACKER® 460 - NATURAL STONE.

WACKER® 465 - FIRE RETARDANT is not recommended for structural glazing bonding.

WACKER® 465 - FIRE RETARDANT is not recommended for sealing areas where contact to drinking water or food is likely. WACKER® 120 – FOOD AND WATER has been specifically developed for these applications.

 WACKER® 465 - FIRE RETARDANT is not suitable for use as a mirror adhesive.

The time until complete curing may be extended at lower temperature, lower humidity, increasing film thickness or by low volume of air exchange - the use of tooling agents should be avoided if possible. Otherwise, water or a diluted solution of a little neutral soap or alcohol in water should be sparingly applied.

Packaging

WACKER® 465 - FIRE RETARDANT is usually supplied in standard size cartridges that fit all standard caulking guns.

Storage

The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

Brenntag North America
1 Cragwood Road Suite 302
812021 South Plainfield
1  6109266100 (Phone)
1 6109163782  (Fax)
Contact distributor Website

More products

Please choose an application for viewing your product matches.

Order

My media


My favorites

My products