WACKER® 180 - HIGH TEMPERATURE
WACKER® 180 - HIGH TEMPERATURE is a one-part, acetoxy high performance silicone sealant specifically in applications that must withstand temperatures of up to 250°C.
WACKER® 180 - HIGH TEMPERATURE cures at room temperature in the presence of atmospheric moisture to give a permanent flexible silicone rubber.
- long shelf life
- excellent tooling characteristics for professional use
- readily gunnable both at low (+5 °C) and high (+40 °C) temperatures
- flexible at low (-40 °C) and high temperatures (+150 °C) following cure
- acetic acid crosslinking system
- rapid crosslinking: quickly becomes tack-free and crack resistant
- adheres excellently to glass, vitrified surfaces, ceramic tiles, many plastics and most paints
- maintains elastic properties at continuous temperatures of up to 250 °C
- short-term resistance up to 275 °C
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth. For application from cartridges cut thread open, fix nozzle on top and cut to required bead size. The sealant can be applied in beads or layers. It requires moisture in order to cure.
The curing time can take longer at lower temperatures, lower humidity or by low volume of air exchange.
Restrictions on use WACKER® 180 - HIGH TEMPERATURE should not be used on substrates such as marble, concrete, fibrous cement and mortar, as the product releases acetic acid during curing. WACKER® 180 - HIGH TEMPERATURE should not be used in contact with metals such as lead, copper, brass or zinc due to corrosion. WACKER® 180 - HIGH TEMPERATURE may be discolored in contact with some organic elastomers, e.g. EPDM and neoprene. WACKER® 180 - HIGH TEMPERATURE is not suitable for applications involving contact with natural stone, such as marble, granite, quartzite, as it can cause staining. WACKER® 180 - HIGH TEMPERATURE is not recommended for sealing of aquarium or for long term use under water. WACKER® 121 - AQUARIUM has been specifically developed for aquarium applications. WACKER® 180 - HIGH TEMPERATURE must not be used for structural glazing bonding. WACKER® 180 - HIGH TEMPERATURE is not suitable as cylinder head gasket or for parts that are constantly exposed to fuels (petrol).
It is the responsibility of the user to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coatings or organic plasticizers can lead to discoloration of the sealant. Cleaning agents and gaseous emissions can damage the sealant in its function or change its appearance. WACKER cannot make a general statement to the compatibility of all these varying materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.
- Sealing of connecting and expansion joints exposed
to high temperatures
- Sealing of joints exposed to constant temperatures
of 250 °C (e.g. industrial ovens and chimney
WACKER® 180 - HIGH TEMPERATURE exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel, glazed tiles); metals (e.g. aluminum, steel); impregnated, varnished or painted wood; and some plastics.
Users must carry out own tests due to the great variety of substrates.
The adhesion can be improved in many cases by pretreatment of the substrate with a primer.
WACKER® 180 - HIGH TEMPERATURE is usually supplied in standard size cartridges that fit all standard caulking guns.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
Please choose an application for viewing your product matches.