Solvent-based, electrically conductive, addition curing silicone rubber dispersion for fabric coating (topcoat)



  •  electrically conductive


All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® RD 6680 F can be used as an electrically conductive textile coating, e.g. in the manufacturing of conveyor belts and compensators or as antistatic topcoat.

ELASTOSIL® RD 6680 F is processed by thorough incorporation of a crosslinker.


Recommended ratio is 100 parts of ELASTOSIL® RD 6680 F plus


- 1 part of CROSSLINKER W or

- 3 parts of CROSSLINKER 525


pot life at 23°C:  8 hours


Recommended curing conditions: evaporation of the solvent at 70 - 90°C and curing of the silicone rubber for 4 min at 160°C or 2 min at 180°C.


Adhesion of ELASTOSIL® RD 6680 F depends on substrate and can be varied by crosslinker type/amount and additives (e.g. CATALYST C05 or adhesion promoters). Preliminary testing should be carried out to determine optimum formulation and cure conditions.


This product is available in 25 kg pails. 


Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds.


The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.


During storage fillers can settle. It is advisable to homogenize the product thoroughly before use. 

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.


My media

My favorites

My products