ELASTOSIL® N291

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber with long open time dedicated to screen printing.

It vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture.



Properties

  • low viscosity
  • low structure viscosity & thixotropy
  • long open time, suitable for screen printing
  • can be colored with 3 - 5 % Pigment Paste FL

Specific features of ELASTOSIL® N291

  • Coolant resistant
  • Heat resistant
  • Non-corrosive to metals
  • Oil resistant
  • Ready to use

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® N291 can be used for screen printing on diverse substrates. It works both on sulphur containing or sulphur free fibre gaskets.

 

Some filler may settle during transport and storage. To ensure a uniform mix, the components should be thoroughly stirred prior to use. ELASTOSIL® N291 is a moisture curing silicone sealant. For this reason the curing rate strongly depends on both temperature and atmospheric humidity in the surrounding. ELASTOSIL® N291 can be applied with standard silk-screen printing equipment.

 

Some filler may settle during transport and storage. To ensure a uniform mix, the components should be thoroughly stirred prior to use.
ELASTOSIL® N291 is a moisture curing silicone sealant. For this reason the curing rate strongly depends on both temperature and atmospheric humidity in the surrounding. ELASTOSIL® N291 can be applied with standard silk-screen printing equipment.

It cures under the influence of moisture from the air. Colors may be obtained by addition of 3 - 5 % Pigment Paste FL if desired. After addition the material has to be mixed carefully.

 

Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES
 

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


My favorites

My products