ELASTOSIL® N10 TRANSPARENT is a solvent-free, neutral cure, low viscous and non-thixotropic silicone sealant which cures at room temperature under influence of atmospheric moisture.

It exhibits excellent primerless adhesion to many substrates


  • low viscosity
  • non-thixotropic

Specific features of ELASTOSIL® N10 TRANSPARENT

  • Adhesion & Strength: Excellent adhesion
  • Adhesion: Non-corrosive to metals
  • Regulation: Solvent-free
  • Resistance: Flexible at low (-40 °C) and high temperatures (+180 °C)
  • Specific Features: Solvent-free
  • Surface Effect: Excellent adhesion
  • Vulcanizate: Flexible at low (-40 °C) and high temperatures (+180 °C)


All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Multipurpose grade for bonding, sealing and potting e.g in electronic applications.

ELASTOSIL® N10 TRANSPARENT is a one-part room temperature vulcanizing sealant that cures to a flexible silicone rubber on exposure to atmospheric moisture. Higher humidity accelerates skin formation and curing as well as elevated temperature. However temperature shall not exceed 50°C during cure. During the crosslinking process, some oxime by-product is released.

After about 25 minutes a dry skin is formed. After formation of a sufficiently thick skin, glued parts may be handled without destruction. ELASTOSIL® N10 shows good primerless adhesion to many substrates. We recommend to run preliminary tests to optimize conditions for the particular application.

If removing of silicone rubber from machines or dispensing equipment is necessary, white spirit is recommended as a solvent. However, cleaning should take place before the rubber is fully cured. Afterwards only the use of mechanical forces in combination with a swelling solvent or the use of high temperatures of approximately 100 °C will help to remove sealant residues.

Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES


The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.


My media

My favorites

My products