ELASTOSIL® LR 3094/60 A/B

Liquid silicone rubber ELASTOSIL® LR 3094/60 A/B is a paste-like two-component compound with extremely short curing times. The vulcanizates are noted for good mechanical as well as electrical properties and for excellent heat resistance. Due to the outstanding compression set there is no need to post-cure technical parts.



Properties

ELASTOSIL® LR 3094/60 contains a black heat stabilizer and therefore provides very good heat resistance. Vulcanizates show very low compression set even without post-curing.

Special features of ELASTOSIL® LR 3094/60 A/B

  • Fast curing
  • Heat resistant
  • Low compression set without post-cure
  • Reduced volatile content

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® LR 3094/60 A/B is particularly suitable for the economical production of large series of articles for the automotive industry, e. g. spark plug boots, distributor caps and various kinds of boots. Parts made from ELASTOSIL® LR 3094/60 A/B can generally be used for technical applications without post-curing, but do not comply with regulations concerning use in the pharmaceutical and food industry.

The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.

 

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg pail and 200 kg drum kits.

Storage

Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian 49221-9397
United States
+1  888  922-5374 (Phone)
+1 517 264-8246  (Fax)
Kontakt
Website

How can we help you?

    Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.