This product is not available in United States. Please use the product search or contact us.

ELASTOSIL® C2934 A

Silicone Rubber Sponge ELASTOSIL® C2934 A is a medium-density silicone rubber sponge compound. It is specifically designed for molding. When properly catalyzed and cured it produces a sponge that is tough and resilient with a uniform, closed-cell structure.

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.


Catalyst ELASTOSIL® C2934 A is supplied without a crosslinking agent. The recommended catalyst level is: - 1.0 parts: 2,5-di(t-butylperoxy)-2,5 dimethylhexane (45% active) per 100 parts of ELASTOSIL® C2934 A. Molding / Post Curing The recommended molding temperature is 350 °F. Using a cool mold, the molding time will vary 15 to 30 minutes depending on part thickness. The recommended post cure is 4 h at 400 °F.


Sponge parts produced from ELASTOSIL® C2934 A are used in applications that require toughness, good thermal stability, and low compression set. Molded gaskets, thermal barriers, and vibration damping pads are a few examples of finished products that can be fabricated from this versatile product.

Storage

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
+1 517 264-8246  (Fax)
Kontakt
Website

How can we help you?

    Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample