SILRES® HP 2000
SILRES® HP 2000 is a reactive aminofunctional methyl phenyl silicone resin supplied as app. 90 wt.%-solution in xylene.
The product is typically used as curing agent/crosslinker for cycloaliphatic epoxy resins in 2-pack high-solids coatings. It significantly improves the weathering resistance of the coating when compared with organic amine curing agents. Such 2-pack epoxypolysiloxane coatings are an isocyanate-free alternative to 2K-polyurethanes as weathering-resistant topcoats.
SILRES® HP 2000 is used as aminofunctional curing agent for cycloaliphatic epoxy resins in high solids coatings. Epoxypolysiloxane coatings formulated with SILRES® HP 2000 are exceptionally weathering resistant.
SILRES® HP 2000 is suitable for the formulation of isocyanate-free topcoats with these properties:
- high initial gloss and excellent gloss retention
- extraordinary long-term weathering resistance
- isocyanate-free ambient temperature crosslinking
- Low VOC coatings, suitable for very high solids coatings
- easy-to-clean/anti-grafitti effect
- corrosion resistance
- Low yellowing
- free of benzylalcohol/alkylphenols
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Store in a dry and cool place.
Protect against moisture.
SILRES® HP 2000 is a reactive aminofunctional silicone resin and cures epoxy resin. It contains primary and secondary amino groups. The amine hydrogen equivalent weight (AHEW) can be calculated by the formlua below using the experimentally determined amine value (available on Certificate of Analysis of the individual batch).
Amine hydrogen equivalent weight (AHEW) [g/mol] = 666,67 / Amine value
Example: Amine value = 2,7 => AHEW = 246,9 g/mol
The epoxy equivalent weight (EEW) of the epoxy resin used allows the correct stoichometric calculation of the amounts to be used. Stoichiometric ratio 1:1 should be the starting point. Over- and undercured coatings are possible and can lead to performance changes of the cured binder.
As an example, the formulation of a weathering-resistant epoxypolysiloxane topcoat might be as follows:
Paint base (Component 1) comprises
- Cycloaliphatic epoxy resin as binder component
- weathering resistant pigments/fillers
optionally additives and solvents
Curing agent (Component 2) comprises
- SILRES® HP 2000
- optionally additives and solvents
Example formulations are available on request.
The two components have to be thouroghly mixed prior to paint application. Pot life is app. 4 h, dry-to-touch time is 4 - 5 h at app. 50 µm dry film thickness (23°C/50% relative humidity).
Ready-to-use coatings can be formulated at very low VOC-values (100 - 250 g/l).
The complete abandonment of isocyanates is also a great advantage regarding environmental, health and safety issues.
Due to its excellent weathering resistance, the epoxy amino polysiloxane coating can offer UV-resistance and weather-resistance as a polyurethane top coat combined with the adhesion and barrier properties of an epoxy amine coat within a single coat. They can be an economical alternative by replacing a three coat system (zinc-rich primer, epoxy, polyurethane) by a two coat system (zinc-rich primer, epoxypolysiloxane)
The excellent resistance to solvents adds anti grafitti-properties to epoxypolysiloxanes because of the easy removal of grafittis by solvent washing.
- industrial coatings
- structural steel (infrastructure)
- marine & protective coatings
- pipelines and containers
- automotive coatings (trucks)
- anti-graffiti coatings
- easy-to-clean coatings
SILRES® HP 2000 crosslinks/self-condenses in the presence of moisture. Contact with moisture must be avoided till the final application of the product.
- 25 kg steel can
- 210 kg steel drum
Contact with tin (e.g. with improper metal containers) or moisture will decrease shelf live.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
Please choose an application for viewing your product matches.