WACKER® E35 60000
Silicone Emulsion WACKER® E35 60000 is a 35% emulsion of a high viscosity Polydimethylsiloxane. It is designed to be used in many applications, such as mold release, car and furniture polish, and other specialty product applications. The E35 Series emulsions contain sodium nitrite as a corrosion inhibitor. These emulsions should not be used in contact with amines.
- Ease and versatility of application
- Chemical inertness
In mold release applications, Wacker’s silicone emulsions are normally diluted to 0.5% - 2.5%. However, in a polish or specialty product formulation, the emulsions are normally used in their concentrated form. Optimum performance is often achieved by blending WACKER® E35 60000 with another E35 series emulsion, for a combination of properties. Normally, a higher viscosity silicone gives good durability and gloss, while the lower viscosity is easier to apply and rub out.
Under normal warehouse conditions, these emulsions are stable in unopened containers for 12 months. Freezing should be avoided and these emulsions should not be stored above 32°C (90°F). The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.