WACKER® E210 is a specially formulated emulsion of an organofunctional silicone blend developed for release in molding operations. WACKER® E210 offers cost savings to the end user by providing more effective performance at lower usage levels, by decreasing the number of rejected parts, or by enhancing the life of the end product.


  • Superior stability 
  • Ultra fine particle size
  • Ease and versatility of application
  • Absence of fire hazard

WACKER® E210 may be applied by brush or by conventional spraying equipment. It can be diluted to low concentrations (0.5% to 2.5% solids) and used directly on the mold. However, if used as supplied, care should be taken to avoid over application. The number of releases per application will depend upon the type of plastic, design of the mold, and the curing temperature of the plastic. Usually a small experimental test should be performed prior to any production scale-up.



WACKER® E210 may cause "fish-eyes" when applied to plastics intended to be painted, unless it is completely removed by cleaning the part with solvent (aromatic or chlorinated hydrocarbon), washing with detergent, or immersing in potassium hydroxide solution.



The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question


My media

My favorites

My products