E35 10000

Silicone Emulsion E35 10000 is a 35% emulsion of a high viscosity Polydimethylsiloxane. It is designed to be used in many applications, such as mold release, car and furniture polish, textile lubricants and softeners, automotive care, and other specialty product applications. The E35 Series emulsions contain sodium nitrite as a corrosion inhibitor. These emulsions should not be used in contact with amines.



Properties

  • Ease and versatility of application
  • Chemical inertness

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

In mold release applications, Wacker’s silicone emulsions are normally diluted to 0.5% - 2.5%. However, in a polish or specialty product formulation, the emulsions are normally used in their concentrated form. In most formulations, the type of emulsion used will depend mostly upon the type of product being prepared. For example, a furniture polish formulator should use a silicone emulsion system that provides high gloss and ease of application and rubout. Many times these features are best achieved by blending two emulsions together, such as E35 350 and E35 10000, or possibly E35 100 and E35 1000 to get a combination of properties. Normally, a higher viscosity type silicone will give high gloss and durability, while the lower viscosity emulsions are easier to apply and rubout.

Storage

Under normal warehouse conditions, these emulsions are stable in unopened containers for 12 months. Freezing should be avoided and these emulsions should not be stored above 32°C (90°F). The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Active content Appearance Emulsifier type pH
E2015 - - Milky-white Milky-white - - 7.5 - 9.5 7.5 - 9.5
E210 - - Milky-white Milky-white Nonionic Nonionic - -
E35 100 - - White White Nonionic Nonionic - -
E35 10000 - - Milky-white Milky-white Nonionic Nonionic - -
E35 350 - - White White Nonionic Nonionic - -
E35 60000 - - White White Nonionic Nonionic - -
E60 100 60 % 60 % Milky-white Milky-white - - - -
E60 1000 - - Milky-white Milky-white - - - -
E60 350 - - Milky-white Milky-white - - - -
PRINT AID E 100 AS - - Milky-white Milky-white Non-ionic Non-ionic 7 - 9 7 - 9
WACKER® E 10 - - milky milky nonionic nonionic 4.0 - 8.0[1] -
WACKER® E 1044 - - milky milky nonionic nonionic 4.5 - 7.5[1] -
WACKER® E 1656 - - milky milky nonionic nonionic 6.0 - 9.0[1] -
WACKER® E 22 - - milky milky nonionic / anionic nonionic / anionic 7.5 - 8.5[1] -
WACKER® E 677 - - Milky-white Milky-white - - - -
WACKER® E22A - - Milky-white Milky-white - - - -
WACKER® NE 4720 - - milky milky anionic anionic 6.0 - 8.0[1] -
Legend
[1] pH | Indicator strips 

Order

My media


My favorites

My products