E210

E210 is a specially formulated emulsion of an organofunctional silicone blend developed for release in molding operations. E210 offers cost savings to the end user by providing more effective performance at lower usage levels, by decreasing the number of rejected parts, or by enhancing the life of the end product.



Properties

  • Superior stability 
  • Ultra fine particle size
  • Ease and versatility of application
  • Absence of fire hazard

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

E210 may be applied by brush or by conventional spraying equipment. It can be diluted to low concentrations (0.5% to 2.5% solids) and used directly on the mold. However, if used as supplied, care should be taken to avoid over application. The number of releases per application will depend upon the type of plastic, design of the mold, and the curing temperature of the plastic. Usually a small experimental test should be performed prior to any production scale-up.

 

Paintability

E210 may cause "fish-eyes" when applied to plastics intended to be painted, unless it is completely removed by cleaning the part with solvent (aromatic or chlorinated hydrocarbon), washing with detergent, or immersing in potassium hydroxide solution.

 

Storage

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Active content Appearance Emulsifier type pH
E2015 - - Milky-white Milky-white - - 7.5 - 9.5 7.5 - 9.5
E210 - - Milky-white Milky-white Nonionic Nonionic - -
E35 100 - - White White Nonionic Nonionic - -
E35 10000 - - Milky-white Milky-white Nonionic Nonionic - -
E35 350 - - White White Nonionic Nonionic - -
E35 60000 - - White White Nonionic Nonionic - -
E60 100 60 % 60 % Milky-white Milky-white - - - -
E60 1000 - - Milky-white Milky-white - - - -
E60 350 - - Milky-white Milky-white - - - -
PRINT AID E 100 AS - - Milky-white Milky-white Non-ionic Non-ionic 7 - 9 7 - 9
WACKER® E 10 - - milky milky nonionic nonionic 4.0 - 8.0[1] -
WACKER® E 1044 - - milky milky nonionic nonionic 4.5 - 7.5[1] -
WACKER® E 1656 - - milky milky nonionic nonionic 6.0 - 9.0[1] -
WACKER® E 22 - - milky milky nonionic / anionic nonionic / anionic 7.5 - 8.5[1] -
WACKER® E 677 - - Milky-white Milky-white - - - -
WACKER® E22A - - Milky-white Milky-white - - - -
WACKER® NE 4720 - - milky milky anionic anionic 6.0 - 8.0[1] -
Legend
[1] pH | Indicator strips 

Order

My media


My favorites

My products