LIOSIL® FC 222 E
LIOSIL® FC 222 E is a nonionic macro emulsion of a reactive, aminofunctional silicone fluid, especially for fabric softeners.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
LIOSIL® FC 222 E is combined with conventional fabric softeners and improves the properties of the fabric softeners.
LIOSIL® FC 222 E is easy to mix with fabric softeners.
LIOSIL® FC 222 E improves the softening efficacy of fabric softeners and the fabrics get a significant softer and pleasant touch. With LIOSIL® FC 222 E the hydrophilicity is increased. Additionally LIOSIL® FC 222 E reduces the friction forces of the iron and therefore the ironing properties are improved significantly.
Preferably LIOSIL® FC 222 E is mixed into the fabric softener at the end of the formulation process by gently stirring.
Example for a fabric softener with LIOSIL® FC 222 E:
20,0 parts esterquat, e.g. Stepantex VK 90 (50°C) are poured slowly into
77,6 parts demineralized water (50°C) while stirring until the mixture is homogenous.
0,4 parts CaCl2 solution (25%) are added;
q.s. perfume, dye, preservative are added;
2 parts LIOSIL® FC 222 E are mixed while stirring;
Approx. 1 - 3 % LIOSIL® FC 222 E
in the fabric softener formulation;
The dosage of LIOSIL® FC 222 E in the fabric softener depends on the expected effects. The level of organic softener can be reduced in favor of LIOSIL® FC 222 E.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
The pH value shown in the certificate of analysis is that of a freshly produced product. It is well known that during storage of the material the pH can slightly increase. This does not have a negative impact onto product quality.