WETSOFT® AE 200
WETSOFT® AE 200 is a modified aminofunctional polydimethylsiloxane for use in non-yellowing, hydrophilic textile finishing.
Specific features of WETSOFT® AE 200
- Specific Features: Dilutable with water
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
WETSOFT® AE 200 is an excellent active ingredient in hydrophilic softeners for finishing all kinds of fibers and textiles.
WETSOFT® AE 200 provides woven and knitwear, in particular nonwovens and terry, with a soft, supple hand.
When applied under normal conditions as part of a softener formulation, WETSOFT® AE 200 has no effect on the whiteness. In fact, it has no perceptible influence on the color or color fastness of textiles and fibers in general.
WETSOFT® AE 200 emulsions are applied in padding and exhaust processes and can be used on their own or in combination with organic softeners, polyethylene waxes, and other finishing agents. Individual tests to ensure compatibility should be carried out in advance in order to ensure compatibility.
WETSOFT® AE 200 can be applied either neat, as a solution or as an emulsion. Suitable solvents include aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, higher alcohols, esters and ketones.
Most textile processes are waterbased. Hence WETSOFT® AE 200 is mainly applied from emulsion.
For greater degrees of dilution, or if the formulation contains other active substances, it is necessary to test the compatibility and storage stability.
Emulsions of WETSOFT® AE 200 are diluted to the optimum concentration for the specific fabric. Application can be done by padding or exhaustion.
1.6 % i-Tridecyl-O-(EO) 3 -H (HLB 8)
10.4 % i-Tridecyl-O-(EO) 8 -H (HLB 13)
6.0 % diethylen glycol lmonobutyl ether
12.0 % demineralized water
30.0 % WETSOFT® AE 200
39.9 % demineralized water
0.1 % preservative
For emulsion manufacturing slow shear mixers are sufficient (e.g. blade, anchor, propeller, etc.).
Add the emulsifiers to the demineralized water and thoroughly homogenize. Slowly add WETSOFT® AE 200 and stir until the product is homogeneous. Finally dilute with demin. water, add the preservative and filter the emulsion through a fine Perlon fabric.
WETSOFT® AE 200 is available
- 190 kg drum
- 950 kg IBC
Store in a dry and cool place.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
Please choose an application for viewing your product matches.