SILRES® BS 280 CF
SILRES® BS 280 CF is a solvent-free silicone concentrate based on silane/siloxane that is dilutable with organic solvents.
Diluted solutions of SILRES® BS 280 CF are highquality water repellents for impregnating mineral building materials, especially silicate free natural stones like limestone or gypsum.
SILRES® BS 280 CF develops its waterrepellent effect after application to construction materials as a result of a reaction with atmospheric humidity.
- catalyst free
- good penetration into building materials
- extremely effective with most natural stone
- good alkali resistance (alkaline mortar joints)
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
SILRES® BS 280 CF is particularly recommended for the conservation of monuments and the restoration of natural stone buildings thanks to its all-round effectiveness and excellent alkali resistance. Good results are also achieved when SILRES® BS 280 CF is used to treat mineral plasters, bricks, sand-lime bricks, aerated concrete and mineral paint.
SILRES® BS 280 CF should be diluted in a ratio of 1:11 (parts by weight).
SILRES® BS 280 CF can be diluted with aliphatic and aromatic hydrocarbons or with anhydrous alcohol. We would especially recommend the use of petroleum hydrocarbons such as white spirit. Alcohols should be used only in special cases, e. g. where contact with materials affected by solvents, such as polystyrene, bitumen etc. cannot be avoided during impregnation.
The "Best use before end" date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.