In addition to its application as an adhesion promoter in formulations and primers, GENIOSIL® GF 93 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties - such as flexural strength, tensile strength and modulus - of the composites. The silane also reduces the filler's sedimentation tendency in the uncured polymer. GENIOSIL® GF 93 also greatly increases water (vapor) and corrosion resistance.
GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. t´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in the presence of moisture (Ethanol is released) to form silanols, which can subsequently react with themselves to produce siloxanes or can bind to inorganic substrates. As a typical amine, GENIOSIL® GF 93 can also interact with numerous organic polymers and thus function as a molecular bridge between organic and inorganic substrates.

1. General processing information:

GENIOSIL® GF 93 is highly miscible with standard organic solvents, such as ethers and hydrocarbons.
Mixing with ketones results in imine formation, while mixing with alcohols other than ethanol leads to an autocatalytic exchange of alkoxy groups until the system reaches thermodynamic equilibrium.
GENIOSIL® GF 93 shows typical amine behavior when exposed to acids, epoxides or isocyanates.
GENIOSIL® GF 93 is highly soluble in neutral water and undergoes hydrolysis.
Caution: due to the enthalpy of solution, mixing GENIOSIL® GF 93 with water is exothermic. A solution of GENIOSIL® GF 93 in water has a pH of 10 - 11 and remains stable for several weeks. Due to the highly reactive nature of GENIOSIL® GF 93, contact with moisture must be avoided during processing to prevent undesired hydrolysis.


2. GENIOSIL® GF 93 as a surface modifier:

Fillers are treated either with pure GENIOSIL® GF 93 or a solution thereof. It may be necessary to pretreat the substrate with water.
The modified filler is preferably bonded to the organic material, e.g. an epoxy resin, by mixing it with a standard curing agent.
In an alternative procedure referred to as "blending", GENIOSIL® GF 93 is added directly to the polymer - either before the organic materials is compounded with the filler or at the same time.
A prerequisite for the blending process is that GENIOSIL® GF 93 and the polymer are compatible and that the resin and GENIOSIL® GF 93 do not react prematurely.


3. GENIOSIL® GF 93 as an adhesion promoter in formulations:

In silane crosslinking formulations (e.g. silane-terminated polyethers or polyurethanes and polysiloxanes), GENIOSIL® GF 93 may be added to the formulation as an adhesion promoter. Processing is effected by means of standard mixing methods. Usually, about 1 - 2 wt % silane is added to the formulation.


Information on available container sizes is obtainable from WACKER subsidiaries.


The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Registration (selected countries / regions)

Listed on or in accordance with the following
EINECS - Europe
ECL - Korea
ENCS - Japan
AICS - Australia
IECSC - China
DSL - Canada
PICCS - Philippines

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question


My media

My favorites

My products