VINNAPAS® UW 2 FS
VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by polymerization of vinyl acetate. VINNAPAS® UW 2 FS is tasteless.
Typical applications for VINNAPAS® UW 2 FS:
- fiber reinforced plastics
- powder injection molding
- sound damping
Melt viscosity, 100% Polymer
Bohlin high temperature viscosimeter
140 °C ~ 4700 Pa·s
160 °C ~ 2600 Pa·s
180 °C ~ 1200 Pa·s
200 °C ~ 600 Pa·s
Solid content Viscosity Brookfield RVT,
in styrene 20 RPM, 23°C (PML 002)
20 % 280 mPa·s
30 % 1800 mPa·s
40 % 9900 mPa·s
If the product is used in applications other than those mentioned, the choice, processing and use of the product is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
For questions concerning food contact status according the chapter 21 CFR (US FDA) and German BfR, please feel free to contact us.Wacker Chemie AG Hanns-Seidel-Platz 4 D-81737 München Germany
VINNAPAS® UW 2 FS should not be stored at temperatures above 20 °C in order to prevent caking. Storage conditions must be dry; material must be protected from direct sun exposure.
Under these conditions the product has a shelf life of at least 12 months starting from the date of receipt.